Re: [coreboot] Coreboot 4.1 for PC Engines Alix 2d13

[Reto Rayen]

Hi guys

When i try with a pxe image (ipxe rom image), then it gets not loaded. Can may anyone help to get this bios working with ipxe. Here are the logs of the startup:

http://pastebin.com/ASfZGsZD

Thank you in advance.

Gesendet von Mail für Windows 10

Von: Reto Rayen
Gesendet: Mittwoch, 21. Oktober 2015 22:59
An: Martin Roth;[e-mail]
Betreff: Re: [coreboot] Coreboot 4.1 for PC Engines Alix 2d13

Hi guys i get it working to boot up a coreboot bios with coreboot version 4.0. Thanks to PaulePanter

Here are the steps:

1.)    Clone the coreboot git -> git clone http://review.coreboot.org/coreboot.git
2.)    Revert back to the coreboot version -> git reset --hard a0a3727dbbd7f3ae9f9021e0797ce2fc61d1b79e
3.)    Download the following .config file for compiling -> http://review.coreboot.org/gitweb?p=board-status.git;a=blob_plain;f=pcengine...
4.)    Open the .config file with «make menuconfig» and close it again
5.)    As least you do the «make» and write the coreboot bios on your «Pc Engines Alix2d13».

PaulePanter will help me now get coreboot bios working with the master code. So with the actual coreboot 4.1

Gesendet von Mail für Windows 10

Von: Reto Rayen
Gesendet: Mittwoch, 21. Oktober 2015 15:30
An: Martin Roth
Betreff: Re: [coreboot] Coreboot 4.1 for PC Engines Alix 2d13

Thank you Martin

I will try it out and let you know.

Gesendet von Mail für Windows 10

Von: Martin Roth
Gesendet: Mittwoch, 21. Oktober 2015 00:48
An: Reto Rayen
Betreff: Re: [coreboot] Coreboot 4.1 for PC Engines Alix 2d13

Hi!  We can absolutely help.

Generally the best way to get coreboot help is on the #coreboot IRC
channel on freenode.net.  If you plan to continue working with
coreboot, you probably want to set up an IRC client, but for now, you
can use a web interface:
https://webchat.freenode.net/?channels=#coreboot

The first things we're going to want are a console log, and to know
how the system is configured (Your .config)

These would generally get posted to your favorite text file site, then
just give us the URL ( pastebin.com )

In your case, I'd recommend that you look at the alix2d configuration
that was posted to the coreboot board-status repository.
http://review.coreboot.org/gitweb?p=board-status.git;a=tree;f=pcengines/alix...

I'd suggest that you check out the revision of the git repo listed in
the revision.txt file, copy the config.txt to your .config (save yours
first), and try to build a binary similar to what was used before.
You can then compare your console output to what was posted.

Hope this helps.
Martin

On Tue, Oct 20, 2015 at 4:15 PM, Reto Rayen  wrote:
> Hi guys i am writing to about compiling a coreboot 4.1 bios for the PC
> Engines Alix 2d13 with ipxe support.
>
> I tried so many different ways and even with «VSA image» with blob support,
> but the bios start always hangs after «RAM initialization». Can may anyone
> help me?
>
> Thank you in advance.