Use awarddeco. afaik the site is down, but it must be mirrored somewhere.
On 1/31/08, joe@smittys.pointclark.net joe@smittys.pointclark.net wrote:
Quoting joe@smittys.pointclark.net:
Quoting Peter Stuge peter@stuge.se:
On Wed, Jan 30, 2008 at 09:50:08AM -0500, joe@smittys.pointclark.net
wrote:
device pci 1e.0 on # PCI bridge: Intel Corporation 82801 PCI Bridge chip drivers/pci/onboard device pci 08.0 on end # Intel Corporation 82801DB PRO/100 VE Ethernet
do_pci_scan_bridge for PCI: 00:1e.0 PCI: pci_scan_bus for bus 01 PCI: devfn 0x38, bad id 0xffffffff Disabling static device: PCI: 01:08.0
It was mentioned a while ago that the PCI ids in debug output is offset by one from the config ids. I don't know for sure, but it's worth investigating.
//Peter
Hmm the correct device id is listed in pci_ids.h, is that what you mean? I have a feeling that the nic is not powering on. With the original bios the lights on the nic come on about 3 seconds after power up. With coreboot there are no lights at all. I wonder if there is a register switch to turn it on???? I'm stumped.....I wonder if the guys at etherboot could help me???
How would do a dump of the nics eeprom in Linux? I'm thinking this is where the problem is coming from???
Thanks - Joe