* Markus Boas ryven@gmx.de [070527 21:14]:
Hi I have littel trouble with this mainboard. First: Is this normal?
<shnip> Capability: 0x10 @ 0x80 PCI: 00:01.0 [1106/8601] enabled PCI: devfn 0x10, bad id 0xffffffff
I'm worry about the bad id.
it just means no device on that address. Everything is fine. Turn the debugging level down to avoid seeing it.
Second: I used etherboot as payload, but it didn't came up. The last output from the serial communcation:
<shnip> LinuxBIOS-2.0.0.0Fallback Sun May 27 20:19:19 UTC 2007 starting... 87 is the comm register SMBus controller enabled vt8601 init starting 00000000 is the north 1106 0601 0120d4 is the computed timing NOP PRECHARGE DUMMY READS CBR MRS NORMAL set ref. rate enable multi-page open Slot 00 is SDRAM <snap>
this rather looks like the first lines than the last ones. Can you provide a full log?