Re: [LinuxBIOS] different versions of the GA-M57SLI-S4 (PLCC vs SPI)

[todthgie]

how about #HOLD ?
----- Original Message ----- 
From: "Peter Stuge" 
To: 
Sent: Wednesday, September 05, 2007 19:55
Subject: Re: [LinuxBIOS] different versions of the GA-M57SLI-S4 (PLCC vs 
SPI)
> On Wed, Sep 05, 2007 at 03:20:08PM +0200, ST wrote:
> > > > Is the modification now wrong?
> > >
> > > ST, can you chime in here?
> >
> > Mh, i don't know anything about SPI, but i think if they also have
> > #init pins it should work.
>
> They don't.
>
> The only signal we can work with is CS# which is connected directly
> to the super io, which means we want to be a bit careful about
> driving it, to be on the safe side.
>
> I'd lift the pin. At least it's in a corner.
>
> //Peter