On 09.09.2008 21:22, ron minnich wrote:
On Tue, Sep 9, 2008 at 12:14 PM, Alex Mauer hawke@hawkesnest.net wrote:
Since the Jetway J7F2* and J7F4* motherboards appear to work fine, what can be done about getting targets for them?
Mine at least (J7F2WE1G3) works without changing the irq_tables. The only change is in mainboard/via/epia-cn/Config.lb, changing "chip superio/via/vt1211" to "chip superio/fintek/f71805f".
However, it would be nice(r) if there was a targets/jetway/j7f2 and presumably a src/mainboard/jetway/j7f2.
I assume there would need to be some way of ensuring that the other files, like mainboard.c, auto.c, etc. stayed synchronised between them though.
What needs to be done for a j7f2 target to be created?
staying in sync is not really an issue. sometimes a board you derived from changes, and you don't want those changes in your board.
You are better off copying.
So your first step is mkdir -p mainboard/jetway/jf72 svn add mainboard/jetway/jf72 svn cp (or whatever) the various epia cn files to that dir.
Right.
And that's why we reduced the amount and size of files to be copied when the v3 architecture was designed.
Regards, Carl-Daniel