On 29.07.2008 18:21, ron minnich wrote:
attached.
ron
I misunderstood the dts when I wrote this code. The @ values are implicitly hex. Correctly emit hex constants for all cases, including the pci a,b syntax.
Tested on dbe62. Note that before this patch goes in we need to change ALL dts files to be hex.
Also a small buglet: fix the strcmp on ioport to match 6, not 3, chars.
Signed-off-by: Ronald G. Minnich rminnich@gmail.com
AFAICS this will break all targets unless each dts is fixed as well. If you include the fixed dts for each board, the patch is Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
./mainboard/adl/msm800sev/dts ./mainboard/amd/db800/dts ./mainboard/amd/norwich/dts ./mainboard/artecgroup/dbe61/dts ./mainboard/artecgroup/dbe62/dts ./mainboard/emulation/qemu-x86/dts ./mainboard/pcengines/alix1c/dts ./mainboard/pcengines/alix2c3/dts
Regards, Carl-Daniel