Good Day
I own the ecs elitegroup 945G-M3 (V1.0a) motherboard and was wondering if there is support for this motherborad.I will be very greatful.Below is the feartures of the board.Thank you
CPU
LGA775 socket for Intel Pentium 4 / Pentium D processor
FSB 1066/800/533 MHz
Support Hyper-Threading Technology
CHIPSET
Intel® 945G & ICH7
North Bridge: Intel® 945G
South Bridge: Intel® ICH7
GRAPHICS
Integrated Intel® Graphics Media Accelerator 950 ( GMA950 )
MEMORY
Dual-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 2 GB
Support DDR2 667/533/400 DDR2 SDRAM
EXPANSION SLOT
1 x PCI Express x1 slot
1 x PCI Express x16 slot
2 x PCI slots
STORAGE
Supported by Intel®ICH7
2 x Ultra DMA100/66 devices
4 x Serial ATAII 3.0Gb/s devices
AUDIO
Realtek ALC880 8-channel audio CODEC
IEEE 1394a
VIA® VT6307, support 2x IEEE1394a ports
LAN
Realtek RTL8110S Gigabit LAN Controller
REAR PANEL I/O
1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x Serial port (COM1)
1 x VGA port
1 x Parallel port (LPT1)
1 x 1394a port
1 x RJ45 LAN connector
1 x Audio port (Line-in,4x Line-out, Mic_in)
INTERNAL I/O CONNECTORS & HEADERS
1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x FDD connector supports two 360K~2.88MB FDDs
1 x IDE connector
4 x Serial ATA connectors
2 x USB 2.0 headers support additional 4 USB Ports
1 x Front panel switch/LED header
1 x Front panel audio header
1 x IrDA for SIR header
1 x 1394a header
AUX-in header
CPUFAN/SYSFAN connectors
SYSTEM BIOS
Award BIOS with 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification
FORM FACTOR
Micro-ATX Size, 244mm*244mm