The i815 is currently unsupported, I've been planning on looking at it once I finish with another board, if noone beats me to it. The 82801AA should be easy to get going, as it will probably work with the other 82801xx code already in linuxbios (perhaps a couple small changes).
-Corey
I am new to LinuxBIOS. It's nice to hear someone is intrested i815 support.
Hardware info: Cpu PGA370 socket 700 Mhz Celeron Coppermine. Bridges FW82815 FW82801AA There is also N82802AB8 chip. This is possibly Fujitsu Siemens Scenic T Motherboard.
lspci: 0000:00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) 0000:00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02) 0000:00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) 0000:00:1f.2 USB Controller: Intel Corporation 82801AA USB (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev 02) 0000:01:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 0000:01:09.0 Ethernet controller: Advanced Micro Devices [AMD] 79c978 [HomePNA] (rev 52)
Super I/O chip is LPC 47M107S-MC http://www.smsc.com/main/catalog/lpc47m10x.html It's TSOP bios device :(
Flashrom can write the bios. I tested it but before rebooting wrote original bios back.
Are Qemu messages intresting in this case?
Jouni