boot: hda1:/boot/vmlinuz root=/dev/sda1 initrd=/boot/initrd.splash console=tty0 console=ttyS0,115200
This is the interesting part. Are you sure FILO views your disk (CF card?) as hda1? Is your /boot an extra partition (mount point) or is it part of the "/" filesystem on hda1?
Are you sure Linux views your disk (CF card?) as /dev/sda1? Did you try /dev/sdb1?
On Linux my disk is mounted as /dev/sda1 on system with original BIOS. So I didn't try others like /dev/sdb1.
The dmesg from below says: Kernel command line: BOOT_IMAGE=Zenwalk ro root=801 splash=silent which is quite different. Where does this stuff come from?
I'd also use "splash=silent" in FILO for now, btw.
Have you tried "root=801" instead of "root=/dev/sda1" in FILO (no idea what 801 is)?
"root=801" is written by automated installation of Zenwalk and is used by Lilo. I just tried this parameter with coreboot, but there is no great different by using this.
Log with acpi=force and root=801:
0
coreboot-2.0.0.0-Fallback Mo 7. Apr 12:53:17 CEST 2008 starting... Enabling mainboard devices Enabling shadow ram vt8623 init starting Detecting Memory Number of Banks 04 Number of Rows 0d Priamry DRAM width08 No Columns 0a MA type e0 Bank 0 (*16 Mb) 10 No Physical Banks 01 Total Memory (*16 Mb) 10 CAS Supported 2.5 3 Cycle time at CL X (nS)50 Cycle time at CL X-0.5 (nS)60 Cycle time at CL X-1 (nS)00 Starting at CAS 3 We can do CAS 2.5 tRP 3c tRCD 3c tRAS 28 Low Bond 00 High Bondcd Setting DQS delay88vt8623 done 00:06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00 10:08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40:00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00 50:c8 de cf 88 e0 07 00 00 e0 00 10 10 10 10 00 00 60:02 ff 00 30 62 32 01 20 42 2d 43 58 00 44 00 00 70:82 48 00 01 01 08 50 00 01 00 00 00 00 00 00 10 80:0f 60 00 00 80 00 00 00 02 00 00 00 00 00 00 00 90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0:02 c0 20 00 07 02 00 1f 04 00 00 00 2f 02 04 00 b0:00 00 00 00 80 00 00 00 88 00 00 04 00 00 00 00 c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0:00 dd 00 00 00 00 01 00 40 00 00 00 00 00 00 00 f0:00 00 00 00 00 00 12 13 00 00 00 00 00 00 00 00 AGP Doing MTRR init. Copying coreboot to RAM. Jumping to coreboot. coreboot-2.0.0.0-Fallback Mo 7. Apr 12:54:44 CEST 2008 booting... clocks_per_usec: 1378 Enumerating buses... APIC_CLUSTER: 0 enabled Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0001 enabled PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [1106/3123] enabled PCI: 00:01.0 [1106/b091] enabled PCI: 00:0d.0 [1106/3044] enabled In vt8235_enable 1106 3038. PCI: 00:10.0 [1106/3038] enabled In vt8235_enable 1106 3038. PCI: 00:10.1 [1106/3038] enabled In vt8235_enable 1106 3038. PCI: 00:10.2 [1106/3038] enabled In vt8235_enable ffff ffff. Disabling static device: PCI: 00:10.3 In vt8235_enable 1106 3177. Initialising Devices Keyboard init... PCI: 00:11.0 [1106/3177] enabled In vt8235_enable 1106 0571. PCI: 00:11.1 [1106/0571] enabled In vt8235_enable 1106 3059. PCI: 00:11.5 [1106/3059] enabled In vt8235_enable 1106 3068. PCI: 00:11.6 [1106/3068] disabled In vt8235_enable 1106 3065. PCI: 00:12.0 [1106/3065] enabled PCI: pci_scan_bus for bus 01 PCI: 01:00.0 [1106/3122] enabled PCI: pci_scan_bus returning with max=001 vt1211 enabling PNP devices. PNP: 002e.0 enabled vt1211 enabling PNP devices. PNP: 002e.1 enabled vt1211 enabling PNP devices. PNP: 002e.2 enabled vt1211 enabling PNP devices. PNP: 002e.3 enabled vt1211 enabling PNP devices. PNP: 002e.b enabled PCI: pci_scan_bus returning with max=001 PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [1106/3123] enabled PCI: 00:01.0 [1106/b091] enabled PCI: 00:0d.0 [1106/3044] enabled PCI: 00:10.0 [1106/3038] enabled PCI: 00:10.1 [1106/3038] enabled PCI: 00:10.2 [1106/3038] enabled PCI: 00:10.3 [1106/3104] enabled PCI: 00:11.0 [1106/3177] enabled PCI: 00:11.1 [1106/0571] enabled PCI: 00:11.5 [1106/3059] enabled PCI: 00:11.6 [1106/3068] enabled PCI: 00:12.0 [1106/3065] enabled PCI: pci_scan_bus for bus 02 PCI: 02:00.0 [1106/3122] enabled PCI: pci_scan_bus returning with max=002 PCI: pci_scan_bus returning with max=002 done Allocating resources... Reading resources... Done reading resources. Allocating VGA resource PCI: 02:00.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:01.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0001 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... I would set ram size to 0x40000 Kbytes PCI: 00:0d.0 10 <- [0x00febfc000 - 0x00febfc7ff] size 0x00000800 gran 0x0b mem PCI: 00:0d.0 14 <- [0x0000002400 - 0x000000247f] size 0x00000080 gran 0x07 io PCI: 00:10.0 20 <- [0x0000002800 - 0x000000281f] size 0x00000020 gran 0x05 io PCI: 00:10.1 20 <- [0x0000002820 - 0x000000283f] size 0x00000020 gran 0x05 io PCI: 00:10.2 20 <- [0x0000002840 - 0x000000285f] size 0x00000020 gran 0x05 io PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] size 0x00000008 gran 0x03 io PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] size 0x00000001 gran 0x00 irq PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] size 0x00000001 gran 0x00 drq PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] size 0x00000008 gran 0x03 io PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq PNP: 002e.1 74 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 drq PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq PNP: 002e.b 60 <- [0x000000ec00 - 0x000000ecff] size 0x00000100 gran 0x08 io PCI: 00:11.1 20 <- [0x00000028c0 - 0x00000028cf] size 0x00000010 gran 0x04 io PCI: 00:11.5 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] size 0x00000100 gran 0x08 io PCI: 00:12.0 14 <- [0x00febfe000 - 0x00febfe0ff] size 0x00000100 gran 0x08 mem I would set ram size to 0x40000 Kbytes PCI: 00:0d.0 10 <- [0x00febfd000 - 0x00febfd7ff] size 0x00000800 gran 0x0b mem PCI: 00:0d.0 14 <- [0x0000002480 - 0x00000024ff] size 0x00000080 gran 0x07 io PCI: 00:10.0 20 <- [0x0000002860 - 0x000000287f] size 0x00000020 gran 0x05 io PCI: 00:10.1 20 <- [0x0000002880 - 0x000000289f] size 0x00000020 gran 0x05 io PCI: 00:10.2 20 <- [0x00000028a0 - 0x00000028bf] size 0x00000020 gran 0x05 io PCI: 00:10.3 10 <- [0x00febff000 - 0x00febff0ff] size 0x00000100 gran 0x08 mem PCI: 00:11.1 20 <- [0x00000028d0 - 0x00000028df] size 0x00000010 gran 0x04 io PCI: 00:11.5 10 <- [0x0000001800 - 0x00000018ff] size 0x00000100 gran 0x08 io PCI: 00:11.6 10 <- [0x0000001c00 - 0x0000001cff] size 0x00000100 gran 0x08 io PCI: 00:12.0 10 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io PCI: 00:12.0 14 <- [0x00fec00000 - 0x00fec000ff] size 0x00000100 gran 0x08 mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 bridge ctrl <- 000f PCI: 00:01.0 cmd <- 07 PCI: 01:00.0 cmd <- ffff PCI: 00:0d.0 cmd <- 83 PCI: 00:10.0 subsystem <- 00/00 PCI: 00:10.0 cmd <- 01 PCI: 00:10.1 subsystem <- 00/00 PCI: 00:10.1 cmd <- 01 PCI: 00:10.2 subsystem <- 00/00 PCI: 00:10.2 cmd <- 01 PCI: 00:11.0 cmd <- 07 PNP: 002e.0 - enabling PNP: 002e.1 - enabling PNP: 002e.2 - enabling PNP: 002e.3 - enabling PNP: 002e.b - enabling PCI: 00:11.1 cmd <- 81 PCI: 00:11.5 subsystem <- 00/00 PCI: 00:11.5 cmd <- 01 PCI: 00:12.0 cmd <- 83 PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 bridge ctrl <- 000f PCI: 00:01.0 cmd <- 07 PCI: 02:00.0 cmd <- 03 PCI: 00:0d.0 cmd <- 83 PCI: 00:10.0 cmd <- 01 PCI: 00:10.1 cmd <- 01 PCI: 00:10.2 cmd <- 01 PCI: 00:10.3 cmd <- 02 PCI: 00:11.0 cmd <- 07 PCI: 00:11.1 cmd <- 81 PCI: 00:11.5 cmd <- 01 PCI: 00:11.6 cmd <- 01 PCI: 00:12.0 cmd <- 83 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor Centaur device 698 CPU: family 06, model 09, stepping 08 Enabling cache
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 128MB, type WB Setting variable MTRR 1, base: 128MB, range: 64MB, type WB Setting variable MTRR 2, base: 192MB, range: 32MB, type WB DONE variable MTRRs Clear out the extra MTRR's
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Disabling local apic...done. CPU #0 Initialized PCI: 00:10.0 init PCI: 00:10.1 init PCI: 00:10.2 init PCI: 00:11.0 init vt8235 init RTC Init RTC: Checksum invalid zeroing cmos Invalid CMOS LB checksum pci_routing_fixup: dev is 000114c0 setting firewire Assigning IRQ 9 to 0:d.0 Readback = 9 setting usb Assigning IRQ 5 to 0:10.0 Readback = 5 Assigning IRQ 9 to 0:10.1 Readback = 9 Assigning IRQ 9 to 0:10.2 Readback = 9 Assigning IRQ 5 to 0:10.3 Readback = 5 setting vt8235 Assigning IRQ 5 to 0:11.1 Readback = 5 Assigning IRQ 9 to 0:11.5 Readback = 9 Assigning IRQ 9 to 0:11.6 Readback = 9 setting ethernet Assigning IRQ 5 to 0:12.0 Readback = 5 setting vga setting pci slot setting cardbus slot setting riser slot PNP: 002e.0 init PNP: 002e.1 init PNP: 002e.2 init PNP: 002e.3 init PNP: 002e.b init PCI: 00:11.1 init Enabling VIA IDE. ide_init: enabling compatibility IDE addresses enables in reg 0x42 0x9 enables in reg 0x42 read back as 0x9 enables in reg 0x40 0x18 enables in reg 0x40 read back as 0x1b enables in reg 0x9 0x8a enables in reg 0x9 read back as 0x8a command in reg 0x4 0x81 command in reg 0x4 reads back as 0x7 PCI: 00:11.5 init PCI: 00:12.0 init Configuring VIA Rhine LAN PCI: 00:00.0 init VT8623 random fixup ... Frame buffer at d0000000 PCI: 00:00.0 init VT8623 random fixup ... Frame buffer at d0000000 PCI: 00:01.0 init VT8623 AGP random fixup ... PCI: 00:0d.0 init PCI: 01:00.0 init VGA random fixup ... INSTALL REAL-MODE IDT DO THE VGA BIOS found VGA: vid=1106, did=3122 rom base, size: fffc0000 write_protect_vgabios bus/devfn = 0x100 biosint: INT# 0x15 biosint: eax 0x5f00 ebx 0x1a7d4 ecx 0x19f8c edx 0x1a7d4 biosint: ebp 0x19f54 esp 0xff2 edi 0xf9b0 esi 0x1a7d4 biosint: ip 0x641c cs 0xc000 flags 0x46 biosint: INT# 0x1a biosint: eax 0xb108 ebx 0x10000 ecx 0x10000 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfcc edi 0xf6 esi 0x1c01b biosint: ip 0x40f0 cs 0xc000 flags 0x46 0xb108: bus 0 devfn 0x0 reg 0xf6 val 0x12 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x1a7d4 ecx 0x9f01 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfdc edi 0x44 esi 0x1c01b biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x10112 biosint: ebp 0x19f54 esp 0xfa4 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x10112 biosint: ebp 0x19f54 esp 0xfa4 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x10112 biosint: ebp 0x19f54 esp 0xf92 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f0f ebx 0x1a7d4 ecx 0x9f8c edx 0x103d5 biosint: ebp 0x19f54 esp 0xfee edi 0x44 esi 0x1a7d4 biosint: ip 0x651b cs 0xc000 flags 0x87 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x1a7d4 ecx 0x9f01 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfdc edi 0x44 esi 0x1a7d4 biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf8e edi 0xac51 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x101 edx 0x10112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x78c edx 0x10112 biosint: ebp 0x10fca esp 0xf88 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf90 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x701 edx 0x10112 biosint: ebp 0x10fca esp 0xf90 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f18 ebx 0x1a7d4 ecx 0x9f01 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfde edi 0x44 esi 0x1a7d4 biosint: ip 0x6533 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf8c edi 0xac49 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x101 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x38c edx 0x10112 biosint: ebp 0x10fc8 esp 0xf86 edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf8e edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x301 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf8e edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f06 ebx 0x18001 ecx 0x80010001 edx 0x0 biosint: ebp 0x10fd6 esp 0xfb4 edi 0x0 esi 0x146a7 biosint: ip 0x6479 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf88 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010101 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010001 edx 0x112 biosint: ebp 0x10fd6 esp 0xf82 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf8a edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010001 edx 0x112 biosint: ebp 0x10fd6 esp 0xf8a edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f08 ebx 0x18001 ecx 0x80010001 edx 0x0 biosint: ebp 0x10fd6 esp 0xfb4 edi 0x0 esi 0x146a7 biosint: ip 0x6485 cs 0xc000 flags 0x202 PCI: 00:01.0 init VT8623 AGP random fixup ... PCI: 00:0d.0 init PCI: 00:10.0 init PCI: 00:10.1 init PCI: 00:10.2 init PCI: 00:10.3 init PCI: 00:11.0 init vt8235 init RTC Init Invalid CMOS LB checksum pci_routing_fixup: dev is 0001ba18 setting firewire Assigning IRQ 9 to 0:d.0 Readback = 9 setting usb Assigning IRQ 5 to 0:10.0 Readback = 5 Assigning IRQ 9 to 0:10.1 Readback = 9 Assigning IRQ 9 to 0:10.2 Readback = 9 Assigning IRQ 5 to 0:10.3 Readback = 5 setting vt8235 Assigning IRQ 5 to 0:11.1 Readback = 5 Assigning IRQ 9 to 0:11.5 Readback = 9 Assigning IRQ 9 to 0:11.6 Readback = 9 setting ethernet Assigning IRQ 5 to 0:12.0 Readback = 5 setting vga setting pci slot setting cardbus slot setting riser slot PCI: 00:11.1 init Enabling VIA IDE. ide_init: enabling compatibility IDE addresses enables in reg 0x42 0x9 enables in reg 0x42 read back as 0x9 enables in reg 0x40 0x1b enables in reg 0x40 read back as 0x1b enables in reg 0x9 0x8a enables in reg 0x9 read back as 0x8f command in reg 0x4 0x7 command in reg 0x4 reads back as 0x7 PCI: 00:11.5 init PCI: 00:11.6 init PCI: 00:12.0 init Configuring VIA Rhine LAN PCI: 02:00.0 init VGA random fixup ... INSTALL REAL-MODE IDT DO THE VGA BIOS found VGA: vid=1106, did=3122 rom base, size: fffc0000 write_protect_vgabios bus/devfn = 0x100 biosint: INT# 0x15 biosint: eax 0x5f00 ebx 0x1a7d4 ecx 0x19f8c edx 0x1c724 biosint: ebp 0x19f54 esp 0xff2 edi 0xf9b0 esi 0x1c724 biosint: ip 0x641c cs 0xc000 flags 0x46 biosint: INT# 0x1a biosint: eax 0xb108 ebx 0x10000 ecx 0x10000 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfcc edi 0xf6 esi 0x1c01b biosint: ip 0x40f0 cs 0xc000 flags 0x46 0xb108: bus 0 devfn 0x0 reg 0xf6 val 0x12 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x1a7d4 ecx 0x9f01 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfdc edi 0x44 esi 0x1c01b biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x10112 biosint: ebp 0x19f54 esp 0xfa4 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x10112 biosint: ebp 0x19f54 esp 0xfa4 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x10112 biosint: ebp 0x19f54 esp 0xf92 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f0f ebx 0x1a7d4 ecx 0x9f8c edx 0x103d5 biosint: ebp 0x19f54 esp 0xfee edi 0x44 esi 0x1c724 biosint: ip 0x651b cs 0xc000 flags 0x87 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x1a7d4 ecx 0x9f01 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfdc edi 0x44 esi 0x1c724 biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf8e edi 0xac51 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x101 edx 0x10112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x78c edx 0x10112 biosint: ebp 0x10fca esp 0xf88 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x10112 biosint: ebp 0x10fca esp 0xf90 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x701 edx 0x10112 biosint: ebp 0x10fca esp 0xf90 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f18 ebx 0x1a7d4 ecx 0x9f01 edx 0x103d5 biosint: ebp 0x19f54 esp 0xfde edi 0x44 esi 0x1c724 biosint: ip 0x6533 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf8c edi 0xac49 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x101 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x38c edx 0x10112 biosint: ebp 0x10fc8 esp 0xf86 edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf8e edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x301 edx 0x10112 biosint: ebp 0x10fc8 esp 0xf8e edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f06 ebx 0x18001 ecx 0x80010001 edx 0x0 biosint: ebp 0x10fd6 esp 0xfb4 edi 0x0 esi 0x146a7 biosint: ip 0x6479 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf88 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010101 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010001 edx 0x112 biosint: ebp 0x10fd6 esp 0xf82 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf8a edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010001 edx 0x112 biosint: ebp 0x10fd6 esp 0xf8a edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f08 ebx 0x18001 ecx 0x80010001 edx 0x0 biosint: ebp 0x10fd6 esp 0xfb4 edi 0x0 esi 0x146a7 biosint: ip 0x6485 cs 0xc000 flags 0x202 Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 done. ACPI: Writing ACPI tables at f0400... ACPI: * FACS ACPI: * DSDT @ 000f04aa Length 3f0 ACPI: * FADT ACPI: added table 1/8 Length now 40 ACPI: done. Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0c00 to 0x00100000 Wrote coreboot table at: 00000530 - 00000c0c checksum 15df
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
rom_stream: 0xfffd0000 - 0xfffd9f0f Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 New segment addr 0x100000 size 0x23f00 offset 0xc0 filesize 0x9c48 (cleaned up) New segment addr 0x100000 size 0x23f00 offset 0xc0 filesize 0x9c48 New segment addr 0x123f00 size 0x48 offset 0x9d20 filesize 0x48 (cleaned up) New segment addr 0x123f00 size 0x48 offset 0x9d20 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000023f00 filesz: 0x0000000000009c48 Clearing Segment: addr: 0x0000000000109c48 memsz: 0x000000000001a2b8 Loading Segment: addr: 0x0000000000123f00 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x107f1c FILO version 0.5 (klausst@thor) Mon Apr 7 12:51:24 CEST 2008 No sound device found boot: hda1:/boot/vmlinuz root=801 initrd=/boot/initrd.splash acpi=force earlyprintk=serial,ttyS0,115200 console=tty0 console=ttyS0,115200 hda: LBA 2049MB: SanDisk SDCFX-2048 Mounted ext2fs Found Linux version 2.6.18.2-34-default (geeko@buildhost) #1 SMP Mon Nov 27 11:46:27 UTC 2006 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000000e000000 (usable) early console enabled 0MB HIGHMEM available. 224MB LOWMEM available. DMI not present or invalid. Using APIC driver default IO/L-APIC disabled because your old system seems to be old overwrite with "apic" ACPI: acpi=force override ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 10000000 (gap: 0e000000:f2000000) Detected 599.731 MHz processor. Built 1 zonelists. Total pages: 57344 Kernel command line: root=801 acpi=force earlyprintk=serial,ttyS0,115200 console=tty0 console=ttyS0,115200 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) disabling early console Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000000e000000 (usable) early console enabled 0MB HIGHMEM available. 224MB LOWMEM available. DMI not present or invalid. Using APIC driver default IO/L-APIC disabled because your old system seems to be old overwrite with "apic" ACPI: acpi=force override ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 10000000 (gap: 0e000000:f2000000) Detected 599.731 MHz processor. Built 1 zonelists. Total pages: 57344 Kernel command line: root=801 acpi=force earlyprintk=serial,ttyS0,115200 console=tty0 console=ttyS0,115200 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) disabling early console Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 222892k/229376k available (1697k kernel code, 6008k reserved, 968k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1201.25 BogoMIPS (lpj=2402519) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 622k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0020 (from 0220) CPU0: Centaur VIA Nehemiah stepping 08 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 Setting up standard PCI resources irq 5: nobody cared (try booting with the "irqpoll" option) [<c0146772>] __report_bad_irq+0x36/0x7d [<c0146968>] note_interrupt+0x1af/0x1eb [<c01ea916>] acpi_ev_sci_xrupt_handler+0x12/0x19 [<c01e5562>] acpi_irq+0xb/0x14 [<c0145ed6>] handle_IRQ_event+0x23/0x49 [<c0145fb5>] __do_IRQ+0xb9/0xee [<c01067aa>] do_IRQ+0x71/0x83 [<c0104e1a>] common_interrupt+0x1a/0x20 [<c0124db8>] __do_softirq+0x51/0xbb [<c0124e58>] do_softirq+0x36/0x3a [<c01067af>] do_IRQ+0x76/0x83 [<c0104e1a>] common_interrupt+0x1a/0x20 [<c01465a2>] setup_irq+0x132/0x190 [<c01e5557>] acpi_irq+0x0/0x14 [<c014667c>] request_irq+0x7c/0x98 [<c01ea904>] acpi_ev_sci_xrupt_handler+0x0/0x19 [<c01e5b96>] acpi_os_install_interrupt_handler+0x60/0x8d [<c01e5557>] acpi_irq+0x0/0x14 [<c01e9ff0>] acpi_ev_install_xrupt_handlers+0x9/0x61 [<c01ea429>] acpi_ev_install_region_handlers+0x62/0x69 [<c01fb792>] acpi_enable_subsystem+0x86/0xa6 [<c03b7afd>] acpi_init+0x54/0x1f2 [<c0226b45>] class_create+0x40/0x56 [<c03b61ce>] fbmem_init+0x5b/0x86 [<c0100414>] init+0x118/0x2bc [<c0103ca6>] ret_from_fork+0x6/0x20 [<c01002fc>] init+0x0/0x2bc [<c01002fc>] init+0x0/0x2bc [<c0102005>] kernel_thread_helper+0x5/0xb handlers: [<c01e5557>] (acpi_irq+0x0/0x14) Disabling IRQ #5 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 9 10) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by vt8235 PM PCI quirk: region 0f00-0f0f claimed by vt8235 SMB Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 0 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: dc000000-ddffffff PREFETCH window: d8000000-dbffffff NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1207573720.092:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S5) md: Autodetecting RAID arrays. Time: tsc clocksource has been installed. md: autorun ... md: ... autorun DONE. RAMDISK: Couldn't find valid RAM disk image starting at 0. VFS: Cannot open root device "801" or unknown-block(8,1) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)