Re: more news on the smartcore P3 and etherboot failures.

[Christopher Stutts]

On Mon, 2002-09-23 at 12:34, Ronald G Minnich wrote:
> So, back to the original issue: inw operations acting wrong. The first
> inw() always reads 0, the seconds reads what looks like the right value.
> Anybody have an idea on what kind of north/south configuration problems
> could make this happen?
>
> ron

Slow (bad) hardware? I've seen that happen on a PCI device at 80 deg. C,
and I've seen it happen on a device which could only speced up to 28MHz
at 3.3V.