Jens Rottmann (JRottmann@LiPPERTembedded.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2553
-gerrit
commit 7503023a41d29ca5f4c6785d3a32b255a201a101 Author: Jens Rottmann JRottmann@LiPPERTembedded.de Date: Thu Feb 28 10:24:20 2013 +0100
LiPPERT FrontRunner-AF [2/2]: actually implement mainboard support
Step 2: change the Persimmon code to adapt it to the new board's hardware.
The FrontRunner-AF is a PC/104+ form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - DDR3 SO-DIMM socket (1.5 or 1.35V) - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0 - 1x SATA, 1x CFast socket - HD Audio (via Realtek ALC886) - PCI and ISA (via ITE IT8888) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - Intel I210 GbE (on APU PCIe x1) - SMSC SCH3112 SIO - PS/2 - 2x RS232/485 - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS)
http://www.adlinktech.com/PD/web/PD_detail.php?pid=1131
Change-Id: Id55f89d224ad669b351c36128b12299802b721ba Signed-off-by: Jens Rottmann JRottmann@LiPPERTembedded.de --- src/mainboard/lippert/Kconfig | 36 ++++++- .../lippert/frontrunner-af/BiosCallOuts.c | 62 ++++-------- .../lippert/frontrunner-af/BiosCallOuts.h | 9 ++ src/mainboard/lippert/frontrunner-af/Kconfig | 21 ++-- .../lippert/frontrunner-af/PlatformGnbPcie.c | 8 +- .../frontrunner-af/PlatformGnbPcieComplex.h | 4 +- .../lippert/frontrunner-af/acpi/routing.asl | 30 +++--- .../lippert/frontrunner-af/acpi/superio.asl | 39 ++++++++ src/mainboard/lippert/frontrunner-af/buildOpts.c | 1 + src/mainboard/lippert/frontrunner-af/devicetree.cb | 95 ++++-------------- src/mainboard/lippert/frontrunner-af/dsdt.asl | 3 + src/mainboard/lippert/frontrunner-af/mainboard.c | 111 ++++++++++++++++++++- .../lippert/frontrunner-af/platform_cfg.h | 44 ++++---- src/mainboard/lippert/frontrunner-af/romstage.c | 6 +- 14 files changed, 296 insertions(+), 173 deletions(-)
diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig index d2b08eb..8797a14 100644 --- a/src/mainboard/lippert/Kconfig +++ b/src/mainboard/lippert/Kconfig @@ -4,7 +4,9 @@ choice prompt "Mainboard model"
config BOARD_LIPPERT_FRONTRUNNER - bool "Cool Frontrunner" + bool "Cool FrontRunner" +config BOARD_LIPPERT_FRONTRUNNER_AF + bool "Cool FrontRunner-AF" config BOARD_LIPPERT_HURRICANE_LX bool "Hurricane-LX" config BOARD_LIPPERT_LITERUNNER_LX @@ -16,7 +18,39 @@ config BOARD_LIPPERT_SPACERUNNER_LX
endchoice
+if BOARD_LIPPERT_FRONTRUNNER_AF +# No code, but two Kconfig options need to know this ... +choice + prompt "AMD Fusion CPU model" + default FUSION_G_T56N + help + The actual CPU model the board is fitted with: + + G-T40R: 1 GHz, single core + G-T56N: 1.65 GHz, dual core + + If unsure check with "grep model /proc/cpuinfo". +config FUSION_G_T40R + bool "G-T40R" + help + The actual CPU model the board is fitted with: + + G-T40R: 1 GHz, single core + + If unsure check with "grep model /proc/cpuinfo". +config FUSION_G_T56N + bool "G-T56N" + help + The actual CPU model the board is fitted with: + + G-T56N: 1.65 GHz, dual core + + If unsure check with "grep model /proc/cpuinfo". +endchoice +endif # BOARD_LIPPERT_FRONTRUNNER_AF + source "src/mainboard/lippert/frontrunner/Kconfig" +source "src/mainboard/lippert/frontrunner-af/Kconfig" source "src/mainboard/lippert/hurricane-lx/Kconfig" source "src/mainboard/lippert/literunner-lx/Kconfig" source "src/mainboard/lippert/roadrunner-lx/Kconfig" diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c index 9bad4f4..d0f33ed 100644 --- a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c +++ b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c @@ -22,7 +22,6 @@ #include "dimmSpd.h" #include "BiosCallOuts.h" #include "heapManager.h" -#include "SB800.h"
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] = { @@ -445,9 +444,21 @@ AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPt /* Call the host environment interface to provide a user hook opportunity. */ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) { - // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. - // Make sure the right speed settings are selected. - ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; + MEM_DATA_STRUCT *MemData = ConfigPtr; + + FCH_IOMUX(184) = 2; // GPIO184: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V + switch (MemData->ParameterListPtr->DDR3Voltage) { + case VOLT1_25: // board is not able to provide this + MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry + // fall through + default: // AGESA.h says in mixed case 1.5V DIMMs get excluded + case VOLT1_35: + FCH_GPIO(184) = 0x08; // = output, disable PU, set to 0 + break; + case VOLT1_5: + FCH_GPIO(184) = 0xC8; // = output, disable PU, set to 1 + } + return AGESA_SUCCESS; }
@@ -465,45 +476,6 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *Conf /* PCIE slot reset control */ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) { - AGESA_STATUS Status; - UINTN FcnData; - PCIe_SLOT_RESET_INFO *ResetInfo; - - UINT32 GpioMmioAddr; - UINT32 AcpiMmioAddr; - UINT8 Data8; - UINT16 Data16; - - FcnData = Data; - ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16=Data8<<8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16|=Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - Status = AGESA_UNSUPPORTED; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot - switch (ResetInfo->ResetControl) { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8); - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8); - Status = AGESA_SUCCESS; - break; - } - break; - } - return Status; + // Dedicated reset not needed for the on-board Intel I210 GbE controller. + return AGESA_UNSUPPORTED; } diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h index c4f4f70..cd743f0 100644 --- a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h +++ b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h @@ -22,6 +22,7 @@
#include "Porting.h" #include "AGESA.h" +#include "SB800.h"
#define BIOS_HEAP_START_ADDRESS 0x10000 /* HEAP during cold boot */ #define BIOS_HEAP_SIZE 0x20000 @@ -70,4 +71,12 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *Conf /* PCIE slot reset control */ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/* FCH GPIO access helpers */ +#define FCH_IOMUX(gpio_nr) (*(u8*)(ACPI_MMIO_BASE+IOMUX_BASE+(gpio_nr))) +#define FCH_GPIO(gpio_nr) (*(volatile u8*)(ACPI_MMIO_BASE+GPIO_BASE+(gpio_nr))) +static inline u8 fch_gpio_state(unsigned int gpio_nr) +{ + return FCH_GPIO(gpio_nr) >> 7; +} + #endif //_BIOS_CALLOUT_H_ diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig index f3f9aa9..4d9cc39 100644 --- a/src/mainboard/lippert/frontrunner-af/Kconfig +++ b/src/mainboard/lippert/frontrunner-af/Kconfig @@ -17,7 +17,7 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
-if BOARD_AMD_PERSIMMON +if BOARD_LIPPERT_FRONTRUNNER_AF
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y @@ -26,11 +26,14 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX select NORTHBRIDGE_AMD_AGESA_FAMILY14 select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_FINTEK_F81865F + select SUPERIO_SMSC_SMSCSUPERIO select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select HAVE_ACPI_RESUME + # S3 doesn't work, heapManager.c:576 fails. But s3_resume.c (look for + # "spi_flash_probe") erases 28 KB and writes 10 KB register dumps to + # SPI flash on _every_ boot, wasting 3 s and causing wear! + #select HAVE_ACPI_RESUME select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID @@ -42,7 +45,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
config MAINBOARD_DIR string - default amd/persimmon + default lippert/frontrunner-af
config APIC_ID_OFFSET hex @@ -50,7 +53,7 @@ config APIC_ID_OFFSET
config MAINBOARD_PART_NUMBER string - default "Persimmon" + default "FrontRunner-AF"
config HW_MEM_HOLE_SIZEK hex @@ -58,7 +61,8 @@ config HW_MEM_HOLE_SIZEK
config MAX_CPUS int - default 2 + default 1 if FUSION_G_T40R + default 2 if FUSION_G_T56N
config MAX_PHYSICAL_CPUS int @@ -111,7 +115,8 @@ config VGA_BIOS
config VGA_BIOS_ID string - default "1002,9802" + default "1002,9804" if FUSION_G_T40R + default "1002,9806" if FUSION_G_T56N
config SB800_AHCI_ROM bool @@ -121,4 +126,4 @@ config DRIVERS_PS2_KEYBOARD bool default n
-endif # BOARD_AMD_PERSIMMON +endif # BOARD_LIPPERT_FRONTRUNNER_AF diff --git a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c index 14839c7..e9e482d 100644 --- a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c +++ b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c @@ -60,19 +60,19 @@ PCIe_PORT_DESCRIPTOR PortList [] = { { 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0) }, // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) { 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0) }, // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) { 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0) }, // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) { @@ -94,7 +94,7 @@ PCIe_DDI_DESCRIPTOR DdiList [] = { 0, //Descriptor flags PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - {ConnectorTypeLvds, Aux1, Hdp1} + {ConnectorTypeTravisDpToLvds, Aux1, Hdp1} }, // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) { diff --git a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h index ec8a6e3..02c7f4e 100644 --- a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h +++ b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h @@ -34,7 +34,7 @@ #define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_PORT_PRESENT 0 //0:Disable 1:Enable #define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 #define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) @@ -42,7 +42,7 @@ #define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_PORT_PRESENT 0 //0:Disable 1:Enable #define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 #define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) diff --git a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl index 24bc809..30b1451 100644 --- a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl +++ b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl @@ -390,18 +390,22 @@ Scope(_SB) { })
Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0003FFFF, 0, 0, 0x14 }, - Package(){0x0003FFFF, 1, 0, 0x15 }, - Package(){0x0003FFFF, 2, 0, 0x16 }, - Package(){0x0003FFFF, 3, 0, 0x17 }, - Package(){0x0004FFFF, 0, 0, 0x15 }, - Package(){0x0004FFFF, 1, 0, 0x16 }, - Package(){0x0004FFFF, 2, 0, 0x17 }, - Package(){0x0004FFFF, 3, 0, 0x14 }, - Package(){0x0005FFFF, 0, 0, 0x16 }, - Package(){0x0005FFFF, 1, 0, 0x17 }, - Package(){0x0005FFFF, 2, 0, 0x14 }, - Package(){0x0005FFFF, 3, 0, 0x15 }, + /* PCI slots: slot 0, slot 1, slot 2, slot 3 behind Dev14, Fun4. */ + Package(){0x0004FFFF, 0, 0, 0x14 }, + Package(){0x0004FFFF, 1, 0, 0x15 }, + Package(){0x0004FFFF, 2, 0, 0x16 }, + Package(){0x0004FFFF, 3, 0, 0x17 }, + Package(){0x0005FFFF, 0, 0, 0x15 }, + Package(){0x0005FFFF, 1, 0, 0x16 }, + Package(){0x0005FFFF, 2, 0, 0x17 }, + Package(){0x0005FFFF, 3, 0, 0x14 }, + Package(){0x0006FFFF, 0, 0, 0x16 }, + Package(){0x0006FFFF, 1, 0, 0x17 }, + Package(){0x0006FFFF, 2, 0, 0x14 }, + Package(){0x0006FFFF, 3, 0, 0x15 }, + Package(){0x0007FFFF, 0, 0, 0x17 }, + Package(){0x0007FFFF, 1, 0, 0x14 }, + Package(){0x0007FFFF, 2, 0, 0x15 }, + Package(){0x0007FFFF, 3, 0, 0x16 }, }) } diff --git a/src/mainboard/lippert/frontrunner-af/acpi/superio.asl b/src/mainboard/lippert/frontrunner-af/acpi/superio.asl new file mode 100644 index 0000000..68a6e13 --- /dev/null +++ b/src/mainboard/lippert/frontrunner-af/acpi/superio.asl @@ -0,0 +1,39 @@ +/* + * SuperI/O devices + * + * This file is part of the coreboot project. + * + * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH + * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* PS/2 Keyboard */ +Device(KBC) { + Name(_HID, EISAID("PNP0303")) + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0060, 0x0060, 1, 1) + IO(Decode16, 0x0064, 0x0064, 1, 1) + IRQNoFlags(){1} + }) +} + +/* PS/2 Mouse */ +Device(PS2M) { + Name(_HID, EISAID("PNP0F13")) + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){12} + }) +} diff --git a/src/mainboard/lippert/frontrunner-af/buildOpts.c b/src/mainboard/lippert/frontrunner-af/buildOpts.c index c6383a2..45ffac6 100644 --- a/src/mainboard/lippert/frontrunner-af/buildOpts.c +++ b/src/mainboard/lippert/frontrunner-af/buildOpts.c @@ -385,6 +385,7 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { // Byte6Seed, Byte7Seed, ByteEccSeed) // Specifies the write leveling seed for a channel of a socket. // + HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), PSO_END diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb index 2f5729d..3b76e80 100644 --- a/src/mainboard/lippert/frontrunner-af/devicetree.cb +++ b/src/mainboard/lippert/frontrunner-af/devicetree.cb @@ -31,7 +31,7 @@ chip northbridge/amd/agesa/family14/root_complex device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] device pci 4.0 on end # PCIE P2P bridge on-board NIC device pci 5.0 off end # PCIE P2P bridge - device pci 6.0 on end # PCIE P2P bridge PCIe slot + device pci 6.0 off end # PCIE P2P bridge device pci 7.0 off end # PCIE P2P bridge device pci 8.0 off end # NB/SB Link P2P bridge end # agesa northbridge @@ -47,36 +47,34 @@ chip northbridge/amd/agesa/family14/root_complex device i2c 50 on end end chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end + device i2c 51 off end end end # SM - device pci 14.1 on end # IDE 0x439c + device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81865f - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 off end # Hardware Monitor - device pnp 4e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 + chip superio/smsc/smscsuperio + device pnp 4e.0 off end # Floppy + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 4e.11 on # COM2 + device pnp 4e.5 on # COM2 io 0x60 = 0x2f8 irq 0x70 = 3 end - end # f81865f + device pnp 4e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.A on # Runtime Regs + io 0x60 = 0x0E00 + drq 0xF0 = 0x0B # no 32kHz + end + end # smscsuperio end #LPC device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} device pci 14.5 off end # OHCI FS/LS USB @@ -85,59 +83,10 @@ chip northbridge/amd/agesa/family14/root_complex device pci 15.1 off end # PCIe PortB device pci 15.2 off end # PCIe PortC device pci 15.3 off end # PCIe PortD - device pci 16.0 off end # OHCI USB 10-13 - device pci 16.2 off end # EHCI USB 10-13 - register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - - #set up SB800 Fan control registers and IMC fan controls - register "imc_port_address" = "0x6E" # 0x2E and 0x6E are common - register "fan0_enabled" = "1" - register "fan1_enabled" = "1" - register "imc_fan_zone0_enabled" = "1" - register "imc_fan_zone1_enabled" = "1" - - register "fan0_config_vals" = "{ \ - FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \ - FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }" - register "fan1_config_vals" = "{ \ - FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \ - FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }" - - register "imc_zone0_mode1" = " \ - IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \ - IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0" - register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \ - IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED" - register "imc_zone0_temp_offset" = "0x00" # No temp offset - register "imc_zone0_hysteresis" = "0x05" # Degrees C Hysteresis - register "imc_zone0_smbus_addr" = "0x98" # Temp Sensor SMBus address - register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number - register "imc_zone0_pwm_step" = "0x01" # Fan PWM stepping rate - register "imc_zone0_ramping" = "0x00" # Disable Fan PWM ramping and stepping - - register "imc_zone1_mode1" = " \ - IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \ - IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1" - register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \ - IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED" - register "imc_zone1_temp_offset" = "0x00" # No temp offset - register "imc_zone1_hysteresis" = "0x05" # Degrees C Hysteresis - register "imc_zone1_smbus_addr" = "0x98" # Temp Sensor SMBus address - register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number - register "imc_zone1_pwm_step" = "0x01" # Fan PWM stepping rate - register "imc_zone1_ramping" = "0x00" # Disable Fan PWM ramping and stepping - - # T56N has a Maximum operating temperature of 90C - # ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C - # ZONEX_FANSPEEDS - Fan speeds as a "percentage" - register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }" - register "imc_zone0_fanspeeds" = "{100, 7, 5, 4, 3, 2, 0, 0 }" - register "imc_zone1_thresholds" = "{ 85, 80, 75, 65, 1, 0, 0, 0, 90 }" - register "imc_zone1_fanspeeds" = "{100, 10, 6, 4, 3, 0, 0, 0 }" - end #southbridge/amd/cimx/sb800 # end # device pci 18.0 # These seem unnecessary diff --git a/src/mainboard/lippert/frontrunner-af/dsdt.asl b/src/mainboard/lippert/frontrunner-af/dsdt.asl index 624919a..eac82f4 100644 --- a/src/mainboard/lippert/frontrunner-af/dsdt.asl +++ b/src/mainboard/lippert/frontrunner-af/dsdt.asl @@ -1462,6 +1462,7 @@ DefinitionBlock ( } } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ #endif + #include "acpi/superio.asl" } /* end LIBR */
Device(HPBR) { @@ -1477,6 +1478,8 @@ DefinitionBlock ( } /* end Ac97modem */
Name(CRES, ResourceTemplate() { + IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ + IO(Decode16, 0x0E00, 0x0E00, 1, 0x80) /* SIO runtime regs */ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c index 2d4916c..875fe35 100644 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ b/src/mainboard/lippert/frontrunner-af/mainboard.c @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
+#include <stdlib.h> #include <console/console.h> #include <device/device.h> #include <device/pci.h> @@ -29,6 +30,109 @@ #include <cpu/amd/agesa/s3_resume.h> #include <cpu/amd/mtrr.h> #include "SBPLATFORM.h" +#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ + +/* Init SIO GPIOs. */ +#define SIO_RT_BASE 0x0E00 +static const u16 sio_init_table[] = { // hi=offset, lo=value + 0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200 + 0x2300, // GP10: COM1 termination = push/pull output + 0x2400, // GP11: COM2 termination = push/pull output + 0x2500, // GP12: COM1 RS485 mode = push/pull output + 0x2600, // GP13: COM2 RS485 mode = push/pull output + 0x2700, // GP14: COM1 speed A = push/pull output + 0x2900, // GP15: COM1 speed B = push/pull output + 0x2A00, // GP16: COM2 speed A = push/pull output + 0x2B00, // GP17: COM2 speed B = push/pull output + + 0x3904, // GP36 = KBDRST# function + + 0x4E74, // GP4x: Ethernet enable = on + 0x6E84, // GP44: Ethernet enable = open drain output + + // GP5x = COM2 function instead of GPIO + 0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604, + + 0x470C, // GP60 = WDT function + 0x5E00, // LED2: Live LED = off + 0x4884, // GP61: Live LED = LED2 function + + 0x5038, // GP6x: USB power = 3x on + 0x5580, // GP63: USB power 0/1 = open drain output + 0x5680, // GP64: USB power 2/3 = open drain output + 0x5780, // GP65: USB power 4/5 = open drain output +}; + +/* Write data block to slave on SMBUS0. */ +#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) +#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) +#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) +#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) +#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) +#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) +static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) +{ + __outbyte(SMB0_STATUS, 0x1E); // clear error status + __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out + __outbyte(SMB0_HOSTCMD, command); // or destination offset + __outbyte(SMB0_DATA0, length); // sent before data + __inbyte(SMB0_CONTROL); // reset block data array + while (length--) + __outbyte(SMB0_BLOCKDATA, *(data++)); + __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ + + while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors + return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors +} + +static void init(struct device *dev) +{ + int i; + printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); + + /* Init Hudson GPIOs. */ + printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); + FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices + FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed + FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU) + FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0 + FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups + FCH_IOMUX( 57) = 1; + FCH_GPIO ( 57) = 0x28; + FCH_IOMUX( 58) = 1; + FCH_GPIO ( 58) = 0x28; + FCH_IOMUX( 96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU) + FCH_IOMUX( 52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector + FCH_IOMUX( 61) = 2; // default to inputs with int. PU + FCH_IOMUX( 62) = 2; + FCH_IOMUX(187) = 2; + FCH_IOMUX(188) = 2; + FCH_IOMUX(189) = 1; + FCH_IOMUX(190) = 1; + FCH_IOMUX(191) = 1; + FCH_IOMUX(192) = 1; + if (!fch_gpio_state(197)) // just in case anyone cares + printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); + printk(BIOS_INFO, "Board revision ID: %u\n", + fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); + + /* Init SIO GPIOs. */ + printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RT_BASE); + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 val = sio_init_table[i]; + outb((u8)val, SIO_RT_BASE + (val >> 8)); + } + + /* Notify the SMC we're alive and kicking, or after a while it will + * effect a power cycle and switch to the alternate BIOS chip. + * Should be done as late as possible. */ + printk(BIOS_INFO, "Sending BIOS alive message\n"); + const u8 i_am_alive[] = { 0x03 }; + if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) + printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); + + printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); +}
void set_pcie_reset(void); void set_pcie_dereset(void); @@ -56,6 +160,7 @@ void set_pcie_dereset(void) static void mainboard_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + dev->ops->init = init;
/* * The mainboard is the first place that we get control in ramstage. Check @@ -65,10 +170,10 @@ static void mainboard_enable(device_t dev) acpi_slp_type = acpi_get_sleep_type(); #endif
- /* enable GPP CLK0 thru CLK1 */ - /* disable GPP CLK2 thru SLT_GFX_CLK */ + /* enable GPP CLK0 */ + /* disable GPP CLK1 thru SLT_GFX_CLK */ u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - *(misc_mem_clk_cntrl + 0) = 0xFF; + *(misc_mem_clk_cntrl + 0) = 0x0F; *(misc_mem_clk_cntrl + 1) = 0x00; *(misc_mem_clk_cntrl + 2) = 0x00; *(misc_mem_clk_cntrl + 3) = 0x00; diff --git a/src/mainboard/lippert/frontrunner-af/platform_cfg.h b/src/mainboard/lippert/frontrunner-af/platform_cfg.h index 80e27ac..a35b043 100644 --- a/src/mainboard/lippert/frontrunner-af/platform_cfg.h +++ b/src/mainboard/lippert/frontrunner-af/platform_cfg.h @@ -77,7 +77,7 @@ * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5 * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6 */ -#define USB_CONFIG 0x7F +#define USB_CONFIG 0x3F
/** * @def PCI_CLOCK_CTRL @@ -90,7 +90,7 @@ * PCI SLOT 3 define at BIT3 * PCI SLOT 4 define at BIT4 */ -#define PCI_CLOCK_CTRL 0x07 +#define PCI_CLOCK_CTRL 0x1F
/** * @def SATA_CONTROLLER @@ -180,13 +180,12 @@ * SDIN2 is define at BIT4 & BIT5 * SDIN3 is define at BIT6 & BIT7 */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A +#define AZALIA_SDIN_PIN 0x02
/** * @def GPP_CONTROLLER */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED +#define GPP_CONTROLLER CIMX_OPTION_DISABLED
/** * @def GPP_CFGMODE @@ -225,29 +224,32 @@ * 0 - Enable * 1 - Disable */ -#define GEC_CONFIG 0 +#define GEC_CONFIG 1
-static const CODECENTRY persimmon_codec_alc269[] = +static const CODECENTRY frontrunneraf_codec_alc886[] = /* Realtek ALC886/8 */ { - /* NID, PinConfig */ - {0x12, 0x411111F0}, - {0x14, 0x99130110}, - {0x21, 0x0121401F}, - {0x17, 0x411111F0}, - {0x18, 0x01A19820}, - {0x19, 0x411111F0}, - {0x1A, 0x0181302F}, - {0x1B, 0x411111F0}, - {0x1D, 0x40069E05}, - {0x1E, 0x411111F0}, - {0x20, 0x0001FFFF}, + /* NID, PinConfig (Verbs 71F..C) */ + {0x11, 0x411111F0}, /* NPC */ + {0x12, 0x411111F0}, /* DMIC */ + {0x14, 0x01214110}, /* FRONT (Port-D) */ + {0x15, 0x01011112}, /* SURR (Port-A) */ + {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ + {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ + {0x18, 0x01A19930}, /* MIC1 (Port-B) */ + {0x19, 0x411111F0}, /* MIC2 (Port-F) */ + {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ + {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ + {0x1C, 0x411111F0}, /* CD-IN */ + {0x1D, 0x40132601}, /* BEEP-IN */ + {0x1E, 0x01441120}, /* S/PDIF-OUT */ + {0x1F, 0x01C46140}, /* S/PDIF-IN */ {0xff, 0xffffffff} /* end of table */ };
static const CODECTBLLIST codec_tablelist[] = { - {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]}, - {0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL} + {0x10ec0888, (CODECENTRY*)&frontrunneraf_codec_alc886[0]}, + {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} };
/** diff --git a/src/mainboard/lippert/frontrunner-af/romstage.c b/src/mainboard/lippert/frontrunner-af/romstage.c index 56a6788..08348d1 100644 --- a/src/mainboard/lippert/frontrunner-af/romstage.c +++ b/src/mainboard/lippert/frontrunner-af/romstage.c @@ -31,7 +31,7 @@ #include <console/loglevel.h> #include "agesawrapper.h" #include "cpu/x86/bist.h" -#include "superio/fintek/f81865f/f81865f_early_serial.c" +#include "superio/smsc/smscsuperio/early_serial.c" #include "cpu/x86/lapic/boot_cpu.c" #include "drivers/pc80/i8254.c" #include "drivers/pc80/i8259.c" @@ -45,7 +45,7 @@ void disable_cache_as_ram(void); /* cache_as_ram.inc */ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
-#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) +#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -70,7 +70,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) sb_Poweron_Init();
post_code(0x31); - f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); }