[LinuxBIOS] r2712 - trunk/LinuxBIOSv2/util/flashrom

Author: stepan
Date: 2007-06-05 14:51:52 +0200 (Tue, 05 Jun 2007)
New Revision: 2712

Modified:
   trunk/LinuxBIOSv2/util/flashrom/board_enable.c
   trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c
Log:
Move GPIO settings to board specific code for IBM x3455

Signed-off-by: Stefan Reinauer 
Acked-by: Stefan Reinauer

Modified: trunk/LinuxBIOSv2/util/flashrom/board_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/board_enable.c	2007-06-05 10:28:39 UTC (rev 2711)
+++ trunk/LinuxBIOSv2/util/flashrom/board_enable.c	2007-06-05 12:51:52 UTC (rev 2712)
@@ -246,6 +246,18 @@
    return 0;
 }

+static int board_ibm_x3455(const char *name)
+{
+	uint8_t byte;
+
+	/* Set GPIO lines in HT1000 southbridge */
+	outb(0x45, 0xcd6);
+	byte = inb(0xcd7);
+	outb(byte|0x20, 0xcd7);
+
+	return 0;
+}
+
 /*
  * We use 2 sets of ids here, you're free to choose which is which. This
  * to provide a very high degree of certainty when matching a board on
@@ -290,6 +302,8 @@
     NULL, NULL, "ASUS A7V8-MX SE", board_asus_a7v8x_mx},
    {0x10B9, 0x1541, 0x0000, 0x0000, 0x10B9, 0x1533, 0x0000, 0x0000,
     "asus", "p5a", "ASUS P5A", board_asus_p5a},
+	{0x1166, 0x0205, 0x1014, 0x0347, 0x0000, 0x0000, 0x0000, 0x0000,
+	 "ibm", "x3455", "IBM x3455", board_ibm_x3455},
    {0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL}	/* Keep this */
 };

Modified: trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c	2007-06-05 10:28:39 UTC (rev 2711)
+++ trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c	2007-06-05 12:51:52 UTC (rev 2712)
@@ -401,11 +401,6 @@
    byte |= (1<<4);
    pci_write_byte(dev, 0x43, byte);

-	/* Some magic. Comment me if you can */
-	outb(0x45, 0xcd6);
-	byte = inb(0xcd7);
-	outb(reg8|0x20, 0xcd7);
-
    return 0;
 }