Dear Sir.
Thank's your prompt reply.
My coreboot source code download from coreboot GIT and ADI's coreboot GIT. both.
This time, I work on official coreboot GIT(not ADI's GIT, but i can do ADI's GIT)
*- attach the descriptor.bin
* I was select the "CONFIG_HAVE_IFD_BIN", "CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY", and fill-up the "CONFIG_IFD_BIN_PATH". And descriptor.bin is extract from ADI's EVB.
*131 CONFIG_HAVE_IFD_BIN=y* 308 # 309 # Southbridge 310 # 311 # CONFIG_AMD_SB_CIMX is not set 312 # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800 is not set 313 # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900 is not set 314 CONFIG_SOUTH_BRIDGE_OPTIONS=y 315 # CONFIG_SOUTHBRIDGE_INTEL_COMMON is not set 316 # CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO is not set * 317 CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY=y** ** 318 CONFIG_IFD_BIN_PATH="../bins/descriptor.bin"*
*- Not exist "INCLUDE_ME" and "ME_PATH"*
I'm can't setup the "INCLUDE_ME" and "ME_PATH" Because thie keyword is not exist coreboot's source tree.
I was try to find the "INCLUDE_ME" and "ME_PATH" from coreboot source, But not exist this keyword.
*poplinux@raw coreboot $ > ls* 3rdparty Documentation Makefile README cscope.out src toolchain.inc COPYING MAINTAINERS Makefile.inc build payloads tags util
*poplinux@raw coreboot $ > grep "INCLUDE_ME" * -Rn*
*poplinux@raw coreboot $ > grep "ME_PATH" * -Rn* cscope.out:9055111:CONFIG_RESUME_PATH_SAME_AS_BOOT cscope.out:16228575:CONFIG_RESUME_PATH_SAME_AS_BOOT cscope.out:16229157:CONFIG_RESUME_PATH_SAME_AS_BOOT src/cscope.out:354905:CONFIG_RESUME_PATH_SAME_AS_BOOT src/cscope.out:7528183:CONFIG_RESUME_PATH_SAME_AS_BOOT src/cscope.out:7528765:CONFIG_RESUME_PATH_SAME_AS_BOOT src/vendorcode/google/chromeos/vboot2/vboot_logic.c:125: if (!IS_ENABLED(CONFIG_RESUME_PATH_SAME_AS_BOOT)) src/vendorcode/google/chromeos/vboot2/vboot_logic.c:311: if (IS_ENABLED(CONFIG_RESUME_PATH_SAME_AS_BOOT) && src/drivers/intel/fsp1_1/romstage.c:181: !IS_ENABLED(CONFIG_RESUME_PATH_SAME_AS_BOOT) && src/Kconfig:540:config RESUME_PATH_SAME_AS_BOOT
Please advise to me.
Thank you.
2016-06-21 오전 6:58에 WANG FEI 이(가) 쓴 글:
Here is a sample,
Please select INCLUDE_ME to y and set ME_PATH to point to your descriptor.bin (Path/descriptor.bin, refer to FSP_FILE as a sample).
On Mon, Jun 20, 2016 at 10:48 PM, WANG FEI <wangfei.jimei@gmail.com mailto:wangfei.jimei@gmail.com> wrote:
YuSeok, how did you attach the descriptor.bin to your coreboot? Did you follow the previous mail to include descriptor.bin with INCLUDE_ME and ME_PATH in .config? On Mon, Jun 20, 2016 at 6:46 AM, 김유석 <poplinux0@gmail.com <mailto:poplinux0@gmail.com>> wrote: Dear Sir. My ENV EVB : ADI SG-2440 source : official coreboot FSP : intel FSP 4.0 I was successfully build-up the coreboot and successfully boot-up my EVB. But My EVB's GbE is not activated(not running.) So, I was try to boot using the original OEM bios(from ADI). *This image is **act**vate the GbE*. Another developer was same quetion to Coreboot communite. And He is resolved this issue. https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html This guy's said that "Must add the descriptor.bin to coreboot.bin". So, I was extract the descriptor.bin from ADI's coreboot.bin And successfully attached the descriptor.bin to my coreboot.bin. *oem_dumped.bin => ADI's default **coreboot.bin, This image are activated the GbE.* *poplinux@raw bins $ >* ./ifdtool -x src/oem_dumped.bin File src/oem_dumped.bin is 8388608 bytes Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff Flash Region 1 (BIOS): 00010000 - 007fffff Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused) Flash Region 3 (GbE): 00fff000 - 00000fff (unused) Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) *poplinux@raw bins $ >* ln -s ./flashregion_0_flashdescriptor.bin descriptor.bin *poplinux@raw bins $ >* ./ifdtool -d ./descriptor.bin File ./descriptor.bin is 65536 bytes FLMAP0: 0x01040003 NR: 1 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x09100206 ISL: 0x09 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210020 PSL: 0x2100 FMSBA: 0x200 FLUMAP1: 0x000002e0 Intel ME VSCC Table Length (VTL): 2 Intel ME VSCC Table Base Address (VTBA): 0x000e00 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: 31 31 35 32 31 35 30 39 32 30 00 00 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Found Region Section FLREG0: 0x000f0000 Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff FLREG1: 0x07ff0010 Flash Region 1 (BIOS): 00010000 - 007fffff FLREG2: 0x00000fff Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused) FLREG3: 0x00000fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00000fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x09200024 Dual Output Fast Read Support: not supported Read ID/Read Status Clock Frequency: 33MHz Write/Erase Clock Frequency: 33MHz Fast Read Clock Frequency: 33MHz Fast Read Support: not supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x00000000 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x00 Invalid Instruction 0: 0x00 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x00080002 PCHSTRP1: 0x00000000 PCHSTRP2: 0x00000000 PCHSTRP3: 0x00000003 PCHSTRP4: 0x0000007f PCHSTRP5: 0x007fffc0 PCHSTRP6: 0x0001c7c0 PCHSTRP7: 0x00000624 PCHSTRP8: 0x00000000 PCHSTRP9: 0xffffffff PCHSTRP10: 0xffffffff PCHSTRP11: 0xffffffff PCHSTRP12: 0xffffffff PCHSTRP13: 0xffffffff PCHSTRP14: 0xffffffff PCHSTRP15: 0xffffffff PCHSTRP16: 0xffffffff PCHSTRP17: 0xffffffff Found Master Section FLMSTR1: 0x1f1f0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x08090118 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0118 FLMSTR3: 0xffffffff (GbE) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0xffff Found Processor Strap Section ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff But GbE is still de-activated. boot log is see below. PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [8086/0000] ops PCI: 00:00.0 [8086/1f0e] enabled Capability: type 0x10 @ 0x40 Capability: type 0x01 @ 0x80 Capability: type 0x0d @ 0x88 Capability: type 0x05 @ 0x90 Capability: type 0x10 @ 0x40 PCI: 00:01.0 subordinate bus PCI Express PCI: 00:01.0 [8086/1f10] enabled PCI: Static device PCI: 00:02.0 not found, disabling it. Capability: type 0x10 @ 0x40 Capability: type 0x01 @ 0x80 Capability: type 0x0d @ 0x88 Capability: type 0x05 @ 0x90 Capability: type 0x10 @ 0x40 PCI: 00:03.0 subordinate bus PCI Express PCI: 00:03.0 [8086/1f12] enabled PCI: Static device PCI: 00:04.0 not found, disabling it. PCI: 00:0b.0 [8086/1f18] enabled PCI: 00:0e.0 [8086/1f14] enabled PCI: 00:0f.0 [8086/1f16] enabled PCI: 00:13.0 [8086/1f15] enabled * PCI: Static device PCI: 00:14.0 not found, disabling it.** ** PCI: Static device PCI: 00:14.1 not found, disabling it.** ** PCI: Static device PCI: 00:14.2 not found, disabling it.** ** PCI: Static device PCI: 00:14.3 not found, disabling it*. I don't have a any idea for activate the GbE. Please advise to me. Thank you. -- coreboot mailing list: coreboot@coreboot.org <mailto:coreboot@coreboot.org> https://www.coreboot.org/mailman/listinfo/coreboot
