Does any see the following errors? hdc is unusable.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx CS5530: IDE controller on PCI bus 00 dev 92 CS5530: chipset revision 0 CS5530: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio hda: C/H/S=0/0/0 from BIOS ignored hda: LEAD DATA, ATA DISK drive hda: cs5530_set_xfer_mode(PIO 1) hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 { DriveStatusError } hdc: SanDisk SDCFB-16, ATA DISK drive hdc: IRQ probe failed (0xfef8) hdc: cs5530_set_xfer_mode(PIO 0) hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdc: set_drive_speed_status: error=0x04 { DriveStatusError } ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0) hda: 64000 sectors (33 MB) w/0KiB Cache, CHS=1000/16/4 hdc: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32 Partition check: hda: hda1 hdc:hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt [PTBL] [15/32/63] hdc1
-Andrew