Hello Lu,
Is there anything in CVS yet for K8 CPU support? I didn't see anything a week or so ago. The AMD folks say it's there and "production level".
?
Thanks.
Alan Mimms, Senior Architect F5 Networks, Inc. Spokane Development Center Liberty Lake, Washington v: 509-343-3524 f: 509-343-3501
-----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Monday, September 29, 2003 10:06 AM To: ron minnich Cc: Stefan Reinauer; Eric W. Biederman; linuxbios@clustermatic.org Subject: Re: config tool + tree enumeration
Ron,
In s2880, If I don't change the 0 to 1. I will get two copy of bus1 devices in the Linux. In S2885, it is OK, if I don't change it.
In Arima, You still can not see bus1 device now?
Regards
Yinghai Lu
-----邮件原件----- 发件人: ron minnich [mailto:rminnich@lanl.gov] 发送时间: 2003年9月29日 10:00 收件人: YhLu 抄送: Stefan Reinauer; Eric W. Biederman; linuxbios@clustermatic.org 主题: Re: config tool + tree enumeration
On Mon, 29 Sep 2003, YhLu wrote:
Stefan,
It's bus 1, that LinuxBIOS and OpenBIOS find really well, only Linux refuses to see it.
Do you update the irq_table.c's interrupt router bus no. from to "0" to
"1"?
that's not the problem. The problem is that linux does not see bus 1 at all.
ron _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios