* Huang-Jen Wang huangjen.wang@gmail.com [050412 10:46]:
Hi Stefan, The message as follow:
setup_timers: CPU 2005 MHz pci_init: Scanning PCI: found 4 devices malloc_diag: alloc: 184 bytes (4 blocks), free: 16192 bytes (1 blocks) pci_init: 00:18.0 1022:1100 0600 00 pci_init: 00:18.1 1022:1101 0600 00 pci_init: 00:18.2 1022:1102 0600 00 pci_init: 00:18.3 1022:1103 0600 00 Press <Enter> for default boot, or <Esc> for boot prompt... timed out boot: hda2:/boot/vmlinuz root=/dev/hda2 console=tty0 console=ttyS0,115200 malloc_diag: alloc: 264 bytes (5 blocks), free: 16112 bytes (1 blocks) malloc_diag: alloc: 280 bytes (6 blocks), free: 16096 bytes (1 blocks) file_open: dev=hda2, path=/boot/vmlinuz find_ide_controller: PCI IDE #0 not found IDE channel 0 not found devopen: failed to open ide
The IDE controller is not detected. Did you set PCI_BRUTE_SCAN = 1 in the filo config file?
Stefan