Author: ruik Date: 2008-02-18 21:40:02 +0100 (Mon, 18 Feb 2008) New Revision: 3107
Modified: trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c Log: Attached patch fixes two typos in the sio_setup routine (comment + wrong exitLDN device) and sets the chipset voltage from 1.6V to 1.5V.
Signed-off-by: Rudolf Marek r.marek@assembler.cz Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c =================================================================== --- trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c 2008-02-18 20:37:49 UTC (rev 3106) +++ trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c 2008-02-18 20:40:02 UTC (rev 3107) @@ -182,16 +182,15 @@
pnp_enter_ext_func_mode(GPIO_DEV); pnp_set_logical_device(GPIO_DEV); - pnp_exit_ext_func_mode(GPIO_DEV); - + /* set memory voltage to 2.75V, vcore offset + 100mV, 1.5V Chipset voltage */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101110 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x1); /* set output val */ + pnp_write_config(GPIO_DEV, 0x30, 0x9); /* Enable GPIO 2 & GPIO 5 */ pnp_write_config(GPIO_DEV, 0xe2, 0x0); /* no inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x3); /* 0000 0011 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe4, 0xa4); /* set output val 1010 0100 */ pnp_write_config(GPIO_DEV, 0xe5, 0x0); /* no inversion */ - pnp_write_config(GPIO_DEV, 0x30, 0x9); /* Enable GPIO 2 & GPIO 5 */ + pnp_write_config(GPIO_DEV, 0xe3, 0x3); /* 0000 0011 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101110 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe1, 0x1); /* set output val */ + pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* set output val 1011 0100 */ pnp_exit_ext_func_mode(GPIO_DEV); }