Re: help can't get it working on epia-m10000

[Stefan Reinauer]

* James Weir  [030810 18:14]:
> I have included below the output from the console when attempting to
> boot linuxbios, it always seems to just hang at this point... any
> pointers... I am on an EPIA-M10000 board.
> Initializing PCI devices...
> PCI devices initialized
> totalram: 127M
> Initializing CPU #0
> Enabling cache...
> Setting fixed MTRRs(0-88) type: UC

I'm having the very same problem. You could try a different DDR Ram
module. The Epia-M Port does not do a complete SPD-based setup of the
ram controller yet

Stefan