keyboard controller jammed

[Gin]

> What is your southbridge (LPC) again ? I guess you
> LPC bridge does not have scan_static_bus is its
> device:scan_bus() method.

I guess you are correct. So the PNP devices are there but didn't get
looped through. But that's in the chip_op of the LPC bridge. It should
be fixed in the code??

Ron,
I did change the board config file for my target board. Here is my
platform:
North Bridge: E7501
South Bridge: ICH3 - S
SuperIO: SMSC(LPC47B27x)

The code I am based on right now is ICH5 and Winbond w83627hf.
Some Dev ID of ICH5 and ICH3-s are different. LPC bridge is one of them.
Don't know if it matters?

Is there code for ICH3-s and SMSC superIO that I can use? Otherwise I
will need to modify from the code I have now.

gin