Martin Roth (martin.roth@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2497
-gerrit
commit 486d40659a96c47a19c53c6fb4e37887a70c59b9 Author: Martin Roth martin.roth@se-eng.com Date: Sun Feb 24 10:46:11 2013 -0700
AMD Fam14: Add SPD read functions to wrapper code
Change: This is the initial step for moving the AMD F14 & HUDSON1,2,3 SPD-read callout out of the mainboard directories and into the wrapper. The next step is to update the platforms to use this routine in BiosCallouts.c and to delete the code from the mainboard directories. The DIMM addresses should be moved into devicetree.cb. If there are significant differences or reasons that the mainboard needs to override this code, it's perfectly reasonable to keep using the version in the mainboard, but this allows us to remove duplicated code and simplify the mainboard directories.
Notes: This started by duplicating what was in Persimmon, and was changed to use the devicetree.cb structures. The ASF setup was also removed from the persimmon copy (PMIO writes to 0x28 & 0x29) as that's not needed for the SPD access and doesn't make sense to initialize here. Significant cleanup and magic number reduction was done as well.
It is intended that this file will not be included in ramstage as the DIMM init is all done in romstage.
This is similar to what was done for Parmer/Thatcher in commit 7fb692bd - http://review.coreboot.org/#/c/2190/ Fam15tn: Move SPD read from mainboards into wrapper
Yes, it would make sense to split this into two separate files and move the SMBUS initialization and access into the southbridge wrapper. Maybe that can come next.
Change-Id: I1e106d3912c160b0015bf02158d9faba4f578ee3 Signed-off-by: Martin Roth martin.roth@se-eng.com --- src/northbridge/amd/agesa/family14/Makefile.inc | 2 + src/northbridge/amd/agesa/family14/chip.h | 42 +++++++ src/northbridge/amd/agesa/family14/dimmSpd.c | 145 ++++++++++++++++++++++++ src/northbridge/amd/agesa/family14/dimmSpd.h | 83 ++++++++++++++ 4 files changed, 272 insertions(+)
diff --git a/src/northbridge/amd/agesa/family14/Makefile.inc b/src/northbridge/amd/agesa/family14/Makefile.inc index 87f4927..e7093fe 100644 --- a/src/northbridge/amd/agesa/family14/Makefile.inc +++ b/src/northbridge/amd/agesa/family14/Makefile.inc @@ -17,4 +17,6 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
+romstage-y += dimmSpd.c + ramstage-y += northbridge.c diff --git a/src/northbridge/amd/agesa/family14/chip.h b/src/northbridge/amd/agesa/family14/chip.h new file mode 100644 index 0000000..56d9c92 --- /dev/null +++ b/src/northbridge/amd/agesa/family14/chip.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _NB_AGESA_CHIP_H_ +#define _NB_AGESA_CHIP_H_ + +struct northbridge_amd_agesa_family14_config +{ + /* + * Here is an example of how this would be put into the devicetree.cb file + * Note that only Socket 0, Channel 0 is used for the Ontario + * (family 14, Fam 0x00-0x0F) parts. + * This should be placed after the device pci 18.x statements + * + * register "spdAddrLookup" = " + * { // Use 8-bit SPD addresses here + * { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 + * { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 (Unused) + * }" + * + */ + + u8 spdAddrLookup[2][2][4]; +}; + +#endif diff --git a/src/northbridge/amd/agesa/family14/dimmSpd.c b/src/northbridge/amd/agesa/family14/dimmSpd.c new file mode 100644 index 0000000..a3f5bb3 --- /dev/null +++ b/src/northbridge/amd/agesa/family14/dimmSpd.c @@ -0,0 +1,145 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/pci_def.h> +#include <device/device.h> +#include <stdlib.h> +#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ + +/* warning: Porting.h includes an open #pragma pack(1) */ +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" +#include "dimmSpd.h" +#include "chip.h" + +/* uncomment for source level debug - GDB gets really confused otherwise. */ +//#pragma optimize ("", off) + +/** + * Read a single SPD byte. If the first byte is being read, set up the + * address and offset. Following bytes auto increment. + */ +static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer, + int offset, int initial_offset) +{ + unsigned int status = -1; + UINT64 time_limit; + + /* clear status register */ + __outbyte(iobase + SMBUS_STATUS_REG, 0x1E); + + if (offset == initial_offset) { + /* Clear slave status, set offset, set slave address and start reading */ + __outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x3E); + __outbyte(iobase + SMBUS_CONTROL_REG, offset); + __outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT); + __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND); + } else { + /* Issue read command - auto increments to next byte */ + __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND); + } + /* time limit to avoid hanging for unexpected error status */ + time_limit = __rdtsc() + MAX_READ_TSC_COUNT; + while (__rdtsc() <= time_limit) { + status = __inbyte(iobase + SMBUS_STATUS_REG); + if ((status & SMBUS_INTERRUPT_MASK) == 0) + continue; /* SMBusInterrupt not set, keep waiting */ + if ((status & HOSTBUSY_MASK) != 0) + continue; /* HostBusy set, keep waiting */ + break; + } + + if (status != STATUS__COMPLETED_SUCCESSFULLY) + return AGESA_ERROR; + + buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG); + return AGESA_SUCCESS; +} + +static void writePmReg(UINT8 reg, UINT8 data) +{ + __outbyte(PMIO_INDEX_REG, reg); + __outbyte(PMIO_DATA_REG, data); +} + +static void setupFch(UINT16 ioBase) +{ + /* set up SMBUS - Set to SMBUS 0 & set base address */ + /* For SB800 & Hudson1 to SB900 & Hudson 2/3 */ + writePmReg(SMBUS_BAR_HIGH_BYTE, ioBase >> 8); + writePmReg(SMBUS_BAR_LOW_BYTE, (ioBase & 0xe0) | 1); + + /* set SMBus clock to 400 KHz */ + __outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000); +} + +/** + * Read one or more SPD bytes from a DIMM. + * Start with offset zero and read sequentially. + * Reads 128 bytes in 7-8 ms at 400 KHz. + */ +static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer, + UINT16 count) +{ + UINT16 index; + UINT8 status; + UINT8 initial_offset = 0; + + setupFch(iobase); + + for (index = initial_offset; index < count; index++) { + status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index, + initial_offset); + if (status != AGESA_SUCCESS) + return status; + } + + return status; +} + +/** + * Gets the SMBUS address for an SPD from the array in devicetree.cb + * then read the SPD into the supplied buffer. + */ +AGESA_STATUS agesa_ReadSPD(UINT32 unused1, UINT32 unused2, void *infoptr) +{ + UINT8 spdAddress; + AGESA_READ_SPD_PARAMS *info = infoptr; + ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2)); + ROMSTAGE_CONST struct northbridge_amd_agesa_family14_config *config = NULL; + + if ((dev == 0) || (dev->chip_info == 0)) + return AGESA_ERROR; + + config = dev->chip_info; + if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup)) + return AGESA_ERROR; + if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0])) + return AGESA_ERROR; + if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0])) + return AGESA_ERROR; + + spdAddress = config->spdAddrLookup + [info->SocketId][info->MemChannelId][info->DimmId]; + + if (spdAddress == 0) + return AGESA_ERROR; + return readspd(SMBUS0_BASE_ADDRESS, spdAddress, (void *)info->Buffer, 128); +} diff --git a/src/northbridge/amd/agesa/family14/dimmSpd.h b/src/northbridge/amd/agesa/family14/dimmSpd.h new file mode 100644 index 0000000..57512c7 --- /dev/null +++ b/src/northbridge/amd/agesa/family14/dimmSpd.h @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#ifndef _DIMMSPD_H_ +#define _DIMMSPD_H_ + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +#define READ_BIT 0x01 + +#define SMBUS_INTERRUPT_MASK 0x02 +#define HOSTBUSY_MASK 0x01 + +#define SMBUS_READ_BYTE_COMMAND 0x48 +#define SMBUS_READ_COMMAND 0x44 + +#define MAX_READ_TSC_COUNT (2000000000 / 10) + +#define PMIO_INDEX_REG 0xCD6 +#define PMIO_DATA_REG 0xCD7 + +#define SMBUS_BAR_LOW_BYTE 0x2C +#define SMBUS_BAR_HIGH_BYTE 0x2D + +#define SMBUS_STATUS_REG 0x00 +#define SMBUS_SLAVE_STATUS_REG 0x01 +#define SMBUS_COMMAND_REG 0x02 +#define SMBUS_CONTROL_REG 0x03 +#define SMBUS_HOST_CMD_REG 0x04 +#define SMBUS_DATA0_REG 0x05 +#define SMBUS_CLOCK_REG 0x0E + +#define STATUS__COMPLETED_SUCCESSFULLY 0x02 + +#define SMBUS_FREQUENCY_CONST 66000000 / 4 +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +agesa_ReadSPD (IN UINT32 Func, IN UINT32 Data, IN OUT void *SpdData); + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +#endif