Dear Corebooters !
R4389 has added initial support for Via C3/CN400/VT8237R based EPIA boards.
This should cover EPIA-N, EPIA-NL and also some of the low end EPIA-SP boards.
The build has been tested on a Via EPIA-NL 8000 fitted with 1GB DDR400 SDRAM.
Current notes for the build for anyone seeking to develop further are as follows::
1/ You need the VGA BIOS from factory BIOS and BOCHS to support the VGA init, as described in the EPIA-M/II HOWTO.
2/ ACPI is completely untested
3/ At this point the build does not actually get through the payload launch stage (may be a coreboot tables issue)
The spew level output is attached, for reference for what to expect if you're working with epia-n.
I'm working now to get FILO launching and then get ACPI working.
Thanks, Jon
SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************