Re: [coreboot] r3529 - trunk/coreboot-v2/targets/tyan/s2912_fam10

[Arne Georg Gleditsch]

Arne Georg Gleditsch  writes:
> Stefan Reinauer  writes:
> > The image resulting from abuild should work on real hardware.  If the
> > board comes with 1024K rom, choosing that size is a good idea.
>
> I'll do that, then.  (I am using the 512K image on real hardware today,
> but I'm padding it with a 512K empty lead-in when programming the
> vendor-supplied flash.  The config file briefly mentions this.)

Side note: the original s2912 port generates a 512K image, as far as I
can see.  Since the same board is supposed to work in both the previous
and fam10 configurations, I'm not sure how we should deal with that.

Hm, Tyan's BIOS downloads appear to be 1M as well...