"Steve M. Gehlbach" steve@nexpath.com writes:
The easy solution is putting the whole image in /dev/hda1 thought it is theoretically possible to put the image on a filesystem and just setup an ELF header at the start of the disk that points to it.
Etherboot also supports booting this way. And it will allow you to multiplex between a hard drive and the network. So it is definitely a good direction to look at.
The raw image is most appealing to me rather than a filesystem. It's simple and easy. I don't know much about ELF headers.
My systems can only boot from the hdd, the network is not always in use. I was under the impression Etherboot was for only for networks. I assume Etherboot within Linuxbios is the option USE_TFTP.
Nope the external etherboot project.
How does the disk/net multiplex work? I am not familiar with that.
You have never set the boot order in the BIOS? Roughly you have a booloader that can boot off of either the hard driver or the network.
Eric