Re: [LinuxBIOS] DK8-HTX hangs on boot

[yhlu]

Can you use serengeti_leopard to build one image and test on you MB?

YH

On 9/11/06, Chris Stillo  wrote:
> Here's the detailed dump... Dies at "Copying LinuxBIOS to ram. "
>
> Anyone have any ideas?
>
> Thanks,
> Chris
>
> LinuxBIOS-2.0.0_Fallback Tue Sep 12 17:21:39 CDT 2006 starting...
> A
> B
> (0,1) link=01
> (1,0) link=01
> 02 nodes initialized.
> C
> D
> ht reset -
> E
>
> dimm: 00.0: 50
> 00: 80 08 07 0d 0b 02 48 00 04 50 65 02 82 08 08 01
> 10: 0e 04 18 01 02 26 c0 60 70 00 00 3c 28 3c 28 80
> 20: 60 60 40 40 00 00 00 00 00 37 46 28 28 50 64 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 3b
> 40: 7f 98 00 00 00 00 00 00 04 4b 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 05 02 a4
> 60: 14 03 6c 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> dimm: 00.1: 51
> 00: 80 08 07 0d 0b 02 48 00 04 50 65 02 82 08 08 01
> 10: 0e 04 18 01 02 26 c0 60 70 00 00 3c 28 3c 28 80
> 20: 60 60 40 40 00 00 00 00 00 37 46 28 28 50 64 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 3b
> 40: 7f 98 00 00 00 00 00 00 04 4b 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 05 02 a4
> 60: 14 76 15 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> dimm: 01.0: 52
> 00:
> dimm: 01.1: 53
> 00:
> F
> G
> Ram1.00
> Ram1.01
> Ram2.00
> Ram2.01
> Ram3
> Initializing memory:  done
> Initializing memory:  done
> Clearing initial memory region:  done
> Ram4
> H
> PCI: 00:18.02
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 00 00 00 01 20 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 de e0 07 00 de e0 07 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 07 00 00 00 00 00 00 00 42 35 82 13 20 0b 10 00
> 90: 00 8c 03 08 08 0a 7b 06 00 00 00 00 12 0f 02 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: cd ef a1 39 00 00 00 00 60 9f 08 9b 8c ae 81 9f
> c0: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 96 9e 10 b4 20 01 90 23 10 a5 48 16 c5 80 01 48
> e0: 94 4b 02 89 28 24 90 05 08 81 40 00 50 07 01 21
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> J
> K
> Copying LinuxBIOS to ram.
>
> -----Original Message-----
> From: Richard Smith [mailto:[e-mail]]
> Sent: Monday, September 11, 2006 9:26 PM
> To: ron minnich
> Cc: Chris Stillo; David Gardner; [e-mail]
> Subject: Re: [LinuxBIOS] DK8-HTX hangs on boot
> > p.s. shameless plug. If you want to bring that board to Hamburg oct. 1
> > we're going to be doing lots of linuxbios hacking at the linuxbios
> > summit -- you'll have a LOT of experts in the room ready to help.
>
> That said. Is anyone bringing a via epia with a vt8601 on it?  Perhpas
> we can figure that out while we are there.
>
> This incoming message has been checked for all known viruses by the
> Messagelabs Scanning System, on behalf of Celoxica Ltd.
>
> This message has been checked for all known viruses by the MessageLabs Virus Scanning Service, on behalf of Celoxica Ltd.
>
> This email and any files transmitted with it are confidential and
> may be legally privileged. It is intended solely for the use of the
> individual or entity to whom it is addressed. If you have received
> this in error, please contact the sender and delete the material
> immediately. Whilst this email has been swept for viruses, you
> should carry out your own virus check before opening any
> attachment. Celoxica Ltd accepts no liability for any loss or
> damage which may be caused by software viruses or interception
> or interruption of this email.