Issue #565 has been updated by Michał Kopeć.
Hi!
Maybe I must use a GOP ?
The intel GOP driver is integrated into FSP. In `make menuconfig`, switch Devices -> Graphics Initialization to `Run a GOP driver`. This will enable the FSP GOP driver, no extra blobs are needed.
wif card pci-e slot is not working, the card is not enumerated at all.
Hmm I tested with Intel AX210 and currently have a Realtek RTL8125 card in there and it works for me without any apparent issues. The logs show that the root port is enabled but nothing is detected at all which is weird.
- Does the same issue happen with a Skylake processor, if you have one to test with? - Could you boot into stock BIOS with the wifi card enabled and do a dump of GPIOs using inteltool? (in coreboot repo's util/inteltool directory, run `make` and `sudo ./inteltool -g`)
---------------------------------------- Bug #565: Wifi card not recognized (not enumerated) at all, Lenovo M700 tiny https://ticket.coreboot.org/issues/565#change-1936
* Author: Vittorio Mori * Status: New * Priority: Normal * Category: board support * Target version: none * Start date: 2024-10-03 * Related links: https://drive.google.com/file/d/1o3ah4UMuQdK5z-D24uLYSXD3if47N5hs/view
* Affected hardware: Lenovo M700 tiny * Affected OS: ANY ---------------------------------------- Hello, I've compiled coreboot for my Lenovo M700 Tiny, to have other processor support (Kaby Lake/Coffee Lake).
The ed2k payload works correctly, I can successfully boot a Kaby Lake and Coffee lake CPU with Coreboot (original Lenovo BIOS is Skylake-only).
I report two annoying issues:
- wif card pci-e slot is not working, the card is not enumerated at all. ASPM on or off, no difference (with ASPM ON I get continous AER errors in dmesg on Linux). With original OEM BIOS the wifi (Intel 8260 wifi5 chipset) 100% works. On coreboot I get only the bluetooth part working (I know it's on the USB bus, so I think it's normal).
- I use libgfxinit for graphics part: works correctly at boot, Linux booting always OK, but Windows 11 fails to initialize the displayport output i.e. it gets TURNED OFF for some reason when windows starts. I have to unplug and plug the cable back to have display back ON. This also does not happen with original OEM firmware. Maybe I must use a GOP ? I could not find a clear guide on how to compile/initialize coreboot w GOP into coreboot. Maybe I can run it into an .efi binary (I have all .efi GOPs somewhere..) ?
Here is the cbmem log:
`[NOTE ] coreboot-24.08-272-g735ca7f24ad4 Tue Sep 24 05:19:22 UTC 2024 x86_32 bootblock starting (log level: 7)... [DEBUG] CPU: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz [DEBUG] CPU: ID 906e9, Kabylake H B0, ucode: 000000f7 [DEBUG] CPU: AES supported, TXT NOT supported, VT supported [DEBUG] MCH: device id 590f (rev 06) is Kabylake-S [DEBUG] PCH: device id a148 (rev 31) is B150 [DEBUG] IGD: device id 5912 (rev 04) is Kaby Lake DT GT2 [DEBUG] FMAP: Found "FLASH" version 1.1 at 0x850000. [DEBUG] FMAP: base = 0xff000000 size = 0x1000000 #areas = 8 [DEBUG] FMAP: area COREBOOT found @ 850200 (8060416 bytes) [INFO ] CBFS: mcache @0xfef04f00 built for 16 files, used 0x364 of 0x4000 bytes [INFO ] CBFS: Found 'fallback/romstage' @0x9d1c0 size 0xb9a0 in mcache @0xfef04f8c [DEBUG] BS: bootblock times (exec / console): total (unknown) / 78 ms
[NOTE ] coreboot-24.08-272-g735ca7f24ad4 Tue Sep 24 05:19:22 UTC 2024 x86_32 romstage starting (log level: 7)... [DEBUG] pm1_sts: 0000 pm1_en: 0000 pm1_cnt: 00000000 [DEBUG] gpe0_sts[0]: 00000000 gpe0_en[0]: 00000000 [DEBUG] gpe0_sts[1]: 00000000 gpe0_en[1]: 00000000 [DEBUG] gpe0_sts[2]: 00000000 gpe0_en[2]: 00000000 [DEBUG] gpe0_sts[3]: 00000002 gpe0_en[3]: 00000000 [DEBUG] TCO_STS: 0000 0001 [DEBUG] GEN_PMCON: e0850200 00001808 [DEBUG] GBLRST_CAUSE: 00000400 00010001 [DEBUG] prev_sleep_state 0 (S0) [DEBUG] FMAP: area COREBOOT found @ 850200 (8060416 bytes) [INFO ] CBFS: Found 'fspm.bin' @0xcadc0 size 0x63000 in mcache @0xfef0513c [DEBUG] FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes) [DEBUG] SPD @ 0x50 [INFO ] SPD: module type is DDR4 [INFO ] SPD: module part number is 4ATF51264HZ-2G3E2 [INFO ] SPD: banks 8, ranks 1, rows 16, columns 10, density 8192 Mb [INFO ] SPD: device width 16 bits, bus width 64 bits [INFO ] SPD: module size is 4096 MB (per channel) [DEBUG] SPD @ 0x52 [INFO ] SPD: module type is DDR4 [INFO ] SPD: module part number is 4ATF51264HZ-2G3E2 [INFO ] SPD: banks 8, ranks 1, rows 16, columns 10, density 8192 Mb [INFO ] SPD: device width 16 bits, bus width 64 bits [INFO ] SPD: module size is 4096 MB (per channel) [DEBUG] CBMEM: [DEBUG] IMD: root @ 0x7afff000 254 entries. [DEBUG] IMD: root @ 0x7affec00 62 entries. [DEBUG] External stage cache: [DEBUG] IMD: root @ 0x7b3ff000 254 entries. [DEBUG] IMD: root @ 0x7b3fec00 62 entries. [DEBUG] FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes) [DEBUG] MRC: Checking cached data update for 'RW_MRC_CACHE'. [DEBUG] MRC: 'RW_MRC_CACHE' does not need update. [DEBUG] 2 DIMMs found [DEBUG] SMM Memory Map [DEBUG] SMRAM : 0x7b000000 0x800000 [DEBUG] Subregion 0: 0x7b000000 0x200000 [DEBUG] Subregion 1: 0x7b200000 0x200000 [DEBUG] Subregion 2: 0x7b400000 0x400000 [DEBUG] top_of_ram = 0x7b000000 [DEBUG] Normal boot [INFO ] CBFS: Found 'fallback/postcar' @0x151e40 size 0x6808 in mcache @0xfef051b0 [DEBUG] Loading module at 0x7abce000 with entry 0x7abce031. filesize: 0x6208 memsize: 0xc5a0 [DEBUG] Processing 368 relocs. Offset value of 0x78bce000 [DEBUG] BS: romstage times (exec / console): total (unknown) / 226 ms
[NOTE ] coreboot-24.08-272-g735ca7f24ad4 Tue Sep 24 05:19:22 UTC 2024 x86_32 postcar starting (log level: 7)... [DEBUG] Normal boot [DEBUG] FMAP: area COREBOOT found @ 850200 (8060416 bytes) [INFO ] CBFS: Found 'fallback/ramstage' @0xa8bc0 size 0x1d278 in mcache @0x7abdc0ec [DEBUG] Loading module at 0x7aa7f000 with entry 0x7aa7f000. filesize: 0x3a428 memsize: 0x14d908 [DEBUG] Processing 4860 relocs. Offset value of 0x76a7f000 [DEBUG] BS: postcar times (exec / console): total (unknown) / 43 ms
[NOTE ] coreboot-24.08-272-g735ca7f24ad4 Tue Sep 24 05:19:22 UTC 2024 x86_32 ramstage starting (log level: 7)... [DEBUG] Normal boot [DEBUG] microcode: sig=0x906e9 pf=0x2 revision=0xf7 [DEBUG] FMAP: area COREBOOT found @ 850200 (8060416 bytes) [INFO ] CBFS: Found 'cpu_microcode_blob.bin' @0x80 size 0x9d000 in mcache @0x7abdc02c [DEBUG] Skip microcode update [INFO ] CBFS: Found 'fsps.bin' @0x12de00 size 0x23ff2 in mcache @0x7abdc27c [DEBUG] Detected 2 core, 4 thread CPU. [DEBUG] Setting up SMI for CPU [DEBUG] IED base = 0x7b400000 [DEBUG] IED size = 0x00400000 [INFO ] Will perform SMM setup. [INFO ] CPU: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz. [INFO ] LAPIC 0x0 in XAPIC mode. [DEBUG] CPU: APIC: 00 enabled [DEBUG] CPU: APIC: 01 enabled [DEBUG] CPU: APIC: 02 enabled [DEBUG] CPU: APIC: 03 enabled [DEBUG] Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178 [DEBUG] Processing 16 relocs. Offset value of 0x00030000 [DEBUG] Attempting to start 3 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [INFO ] LAPIC 0x1 in XAPIC mode. [DEBUG] done. [INFO ] AP: slot 3 apic_id 1, MCU rev: 0x000000f7 [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [INFO ] LAPIC 0x3 in XAPIC mode. [INFO ] LAPIC 0x2 in XAPIC mode. [INFO ] AP: slot 1 apic_id 3, MCU rev: 0x000000f7 [INFO ] AP: slot 2 apic_id 2, MCU rev: 0x000000f7 [DEBUG] Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1b0 memsize: 0x1b0 [DEBUG] Processing 9 relocs. Offset value of 0x00038000 [DEBUG] smm_module_setup_stub: stack_top = 0x7b002000 [DEBUG] smm_module_setup_stub: per cpu stack_size = 0x800 [DEBUG] smm_module_setup_stub: runtime.smm_size = 0x10000 [DEBUG] SMM Module: stub loaded at 38000. Will call 0x7aa98de3 [DEBUG] Installing permanent SMM handler to 0x7b000000 [DEBUG] HANDLER [0x7b1fe000-0x7b1ffe8f]
[DEBUG] CPU 0 [DEBUG] ss0 [0x7b1fdc00-0x7b1fdfff] [DEBUG] stub0 [0x7b1f6000-0x7b1f61af]
[DEBUG] CPU 1 [DEBUG] ss1 [0x7b1fd800-0x7b1fdbff] [DEBUG] stub1 [0x7b1f5c00-0x7b1f5daf]
[DEBUG] CPU 2 [DEBUG] ss2 [0x7b1fd400-0x7b1fd7ff] [DEBUG] stub2 [0x7b1f5800-0x7b1f59af]
[DEBUG] CPU 3 [DEBUG] ss3 [0x7b1fd000-0x7b1fd3ff] [DEBUG] stub3 [0x7b1f5400-0x7b1f55af]
[DEBUG] stacks [0x7b000000-0x7b001fff] [DEBUG] Loading module at 0x7b1fe000 with entry 0x7b1ff81b. filesize: 0x1db0 memsize: 0x1e90 [DEBUG] Processing 149 relocs. Offset value of 0x7b1fe000 [DEBUG] FMAP: area SMMSTORE found @ 810000 (262144 bytes) [DEBUG] smm store: 4 # blocks with size 0x10000 [DEBUG] Loading module at 0x7b1f6000 with entry 0x7b1f6000. filesize: 0x1b0 memsize: 0x1b0 [DEBUG] Processing 9 relocs. Offset value of 0x7b1f6000 [DEBUG] smm_module_setup_stub: stack_top = 0x7b002000 [DEBUG] smm_module_setup_stub: per cpu stack_size = 0x800 [DEBUG] smm_module_setup_stub: runtime.smm_size = 0x200000 [DEBUG] SMM Module: placing smm entry code at 7b1f5c00, cpu # 0x1 [DEBUG] SMM Module: placing smm entry code at 7b1f5800, cpu # 0x2 [DEBUG] SMM Module: placing smm entry code at 7b1f5400, cpu # 0x3 [DEBUG] SMM Module: stub loaded at 7b1f6000. Will call 0x7b1ff81b [DEBUG] Clearing SMI status registers [DEBUG] TCO_STS: INTRD_DET [DEBUG] GPE0 STD STS: HOTPLUG [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7b1ee000, cpu = 0 [DEBUG] In relocation handler: CPU 0 [DEBUG] New SMBASE=0x7b1ee000 IEDBASE=0x7b400000 [DEBUG] Writing SMRR. base = 0x7b000006, mask=0xff800800 [DEBUG] Relocation complete. [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7b1ed800, cpu = 2 [DEBUG] In relocation handler: CPU 2 [DEBUG] New SMBASE=0x7b1ed800 IEDBASE=0x7b400000 [DEBUG] Writing SMRR. base = 0x7b000006, mask=0xff800800 [DEBUG] Relocation complete. [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7b1edc00, cpu = 1 [DEBUG] In relocation handler: CPU 1 [DEBUG] New SMBASE=0x7b1edc00 IEDBASE=0x7b400000 [DEBUG] Relocation complete. [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7b1ed400, cpu = 3 [DEBUG] In relocation handler: CPU 3 [DEBUG] New SMBASE=0x7b1ed400 IEDBASE=0x7b400000 [DEBUG] Relocation complete. [INFO ] Initializing CPU #0 [DEBUG] CPU: vendor Intel device 906e9 [DEBUG] CPU: family 06, model 9e, stepping 09 [DEBUG] Clearing out pending MCEs [DEBUG] cpu: energy policy set to 6 [INFO ] Turbo is unavailable [DEBUG] Skip microcode update [INFO ] CPU #0 initialized [INFO ] Initializing CPU #3 [INFO ] Initializing CPU #1 [INFO ] Initializing CPU #2 [DEBUG] CPU: vendor Intel device 906e9 [DEBUG] CPU: family 06, model 9e, stepping 09 [DEBUG] CPU: vendor Intel device 906e9 [DEBUG] CPU: family 06, model 9e, stepping 09 [DEBUG] Clearing out pending MCEs [DEBUG] Clearing out pending MCEs [DEBUG] cpu: energy policy set to 6 [DEBUG] CPU: vendor Intel device 906e9 [DEBUG] CPU: family 06, model 9e, stepping 09 [DEBUG] cpu: energy policy set to 6 [DEBUG] Skip microcode update [INFO ] CPU #1 initialized [DEBUG] Skip microcode update [INFO ] CPU #2 initialized [DEBUG] Clearing out pending MCEs [DEBUG] cpu: energy policy set to 6 [DEBUG] Skip microcode update [INFO ] CPU #3 initialized [INFO ] bsp_do_flight_plan done after 420 msecs. [DEBUG] Enabling SMIs. [DEBUG] Locking SMM. [DEBUG] VMX status: enabled [DEBUG] VMX status: enabled [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] VMX status: enabled [DEBUG] VMX status: enabled [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] BS: BS_DEV_INIT_CHIPS entry times (exec / console): 204 / 381 ms [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] WEAK: src/soc/intel/skylake/chip.c/mainboard_silicon_init_params called [INFO ] FSPS, status=0x00000000 [INFO ] ITSS IRQ Polarities Before: [INFO ] IPC0: 0x00ff4000 [INFO ] IPC1: 0x00000007 [INFO ] IPC2: 0x00000000 [INFO ] IPC3: 0x00000000 [INFO ] ITSS IRQ Polarities After: [INFO ] IPC0: 0x00ff4000 [INFO ] IPC1: 0x00000007 [INFO ] IPC2: 0x00000000 [INFO ] IPC3: 0x00000000 [INFO ] Found PCIe Root Port #7 at PCI: 00:1c.0. [NOTE ] pcie_rp_update_dev: Couldn't find PCIe Root Port #17 (originally PCI: 00:00:1b.0) which was enabled in devicetree, removing and disabling. [INFO ] Remapping PCIe Root Port #7 from PCI: 00:00:1c.6 to new function number 0. [DEBUG] BS: BS_DEV_INIT_CHIPS run times (exec / console): 56 / 73 ms [INFO ] Enumerating buses... [INFO ] Board ID: ThinkCentre M700 Tiny [INFO ] Serial header unpopulated [INFO ] PS/2 header unpopulated [INFO ] USB header unpopulated [INFO ] DisplayPort header populated [INFO ] PCIe / SATA header unpopulated [DEBUG] Root Device scanning... [DEBUG] CPU_CLUSTER: 0 enabled [DEBUG] DOMAIN: 00000000 enabled [DEBUG] DOMAIN: 00000000 scanning... [DEBUG] PCI: pci_scan_bus for segment group 00 bus 00 [DEBUG] PCI: 00:00:00.0 [8086/590f] enabled [DEBUG] PCI: 00:00:02.0 [8086/5912] enabled [DEBUG] PCI: 00:00:04.0 [8086/1903] enabled [DEBUG] PCI: 00:00:08.0 [8086/1911] enabled [DEBUG] PCI: 00:00:14.0 [8086/a12f] enabled [DEBUG] PCI: 00:00:14.2 [8086/a131] enabled [DEBUG] PCI: 00:00:16.0 [8086/a13a] enabled [DEBUG] PCI: 00:00:17.0 [8086/a102] enabled [DEBUG] PCI: 00:00:19.0 [8086/a166] disabled [DEBUG] PCI: 00:00:1c.0 [8086/a116] enabled [DEBUG] PCI: 00:00:1f.0 [8086/a148] enabled [DEBUG] PCI: 00:00:1f.1 [8086/a120] enabled [DEBUG] PCI: 00:00:1f.2 [8086/a121] enabled [DEBUG] PCI: 00:00:1f.3 [8086/a170] enabled [DEBUG] PCI: 00:00:1f.4 [8086/a123] enabled [DEBUG] PCI: 00:00:1f.6 [8086/15b8] enabled [DEBUG] GPIO: 0 enabled [WARN ] PCI: Leftover static devices: [WARN ] PCI: 00:00:01.0 [WARN ] PCI: 00:00:01.1 [WARN ] PCI: 00:00:01.2 [WARN ] PCI: 00:00:05.0 [WARN ] PCI: 00:00:07.0 [WARN ] PCI: 00:00:13.0 [WARN ] PCI: 00:00:14.1 [WARN ] PCI: 00:00:14.3 [WARN ] PCI: 00:00:15.0 [WARN ] PCI: 00:00:15.1 [WARN ] PCI: 00:00:15.2 [WARN ] PCI: 00:00:15.3 [WARN ] PCI: 00:00:16.1 [WARN ] PCI: 00:00:16.2 [WARN ] PCI: 00:00:16.3 [WARN ] PCI: 00:00:16.4 [WARN ] PCI: 00:00:19.1 [WARN ] PCI: 00:00:19.2 [WARN ] PCI: 00:00:1e.0 [WARN ] PCI: 00:00:1e.1 [WARN ] PCI: 00:00:1e.2 [WARN ] PCI: 00:00:1e.3 [WARN ] PCI: 00:00:1e.4 [WARN ] PCI: 00:00:1e.5 [WARN ] PCI: 00:00:1e.6 [WARN ] PCI: 00:00:1f.5 [WARN ] PCI: 00:00:1f.7 [WARN ] PCI: Check your devicetree.cb. [DEBUG] PCI: 00:00:02.0 scanning... [DEBUG] scan_bus: bus PCI: 00:00:02.0 finished in 0 msecs [DEBUG] PCI: 00:00:14.0 scanning... [DEBUG] scan_bus: bus PCI: 00:00:14.0 finished in 0 msecs [DEBUG] PCI: 00:00:1c.0 scanning... [DEBUG] PCI: pci_scan_bus for segment group 00 bus 01 [DEBUG] GENERIC: 0.0 enabled [INFO ] PCI: 00:00:1c.0: Setting Max_Payload_Size to 128 for devices under this root port [DEBUG] scan_bus: bus PCI: 00:00:1c.0 finished in 18 msecs [DEBUG] PCI: 00:00:1f.0 scanning... [DEBUG] PNP: 002e.1 disabled [DEBUG] PNP: 002e.2 enabled [DEBUG] PNP: 002e.3 disabled [DEBUG] PNP: 002e.5 disabled [DEBUG] PNP: 002e.6 disabled [DEBUG] PNP: 002e.7 disabled [DEBUG] PNP: 002e.8 disabled [DEBUG] PNP: 002e.9 disabled [DEBUG] PNP: 002e.a enabled [DEBUG] PNP: 002e.b enabled [DEBUG] PNP: 002e.c disabled [DEBUG] PNP: 002e.d disabled [DEBUG] PNP: 002e.e enabled [DEBUG] PNP: 002e.f disabled [INFO ] Found TPM 1.2 NPCT420AA V2 (0x00fe) by Nuvoton (0x1050) [DEBUG] PNP: 0c31.0 enabled [DEBUG] scan_bus: bus PCI: 00:00:1f.0 finished in 59 msecs [DEBUG] PCI: 00:00:1f.2 scanning... [DEBUG] scan_bus: bus PCI: 00:00:1f.2 finished in 0 msecs [DEBUG] PCI: 00:00:1f.3 scanning... [DEBUG] scan_bus: bus PCI: 00:00:1f.3 finished in 0 msecs [DEBUG] PCI: 00:00:1f.4 scanning... [DEBUG] scan_bus: bus PCI: 00:00:1f.4 finished in 0 msecs [DEBUG] scan_bus: bus DOMAIN: 00000000 finished in 336 msecs [DEBUG] scan_bus: bus Root Device finished in 354 msecs [INFO ] done [DEBUG] BS: BS_DEV_ENUMERATE run times (exec / console): 10 / 391 ms [INFO ] MRC: Could not find region 'UNIFIED_MRC_CACHE' [DEBUG] FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes) [INFO ] MRC: NOT enabling PRR for 'RW_MRC_CACHE'. [DEBUG] BS: BS_DEV_ENUMERATE exit times (exec / console): 0 / 18 ms [DEBUG] found VGA at PCI: 00:00:02.0 [DEBUG] Setting up VGA for PCI: 00:00:02.0 [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 00000000 [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge Root Device [INFO ] Allocating resources... [INFO ] Reading resources... [DEBUG] SA MMIO resource: PCIEXBAR -> base = 0xe0000000, size = 0x10000000 [DEBUG] SA MMIO resource: MCHBAR -> base = 0xfed10000, size = 0x00008000 [DEBUG] SA MMIO resource: DMIBAR -> base = 0xfed18000, size = 0x00001000 [DEBUG] SA MMIO resource: EPBAR -> base = 0xfed19000, size = 0x00001000 [DEBUG] SA MMIO resource: GDXCBAR -> base = 0xfed84000, size = 0x00001000 [DEBUG] SA MMIO resource: EDRAMBAR -> base = 0xfed80000, size = 0x00004000 [DEBUG] SA MMIO resource: GFXVTBAR -> base = 0xfed90000, size = 0x00001000 [DEBUG] SA MMIO resource: VTVC0BAR -> base = 0xfed91000, size = 0x00001000 [INFO ] Available memory above 4GB: 6112M [INFO ] Done reading resources. [INFO ] === Resource allocator: DOMAIN: 00000000 - Pass 1 (relative placement) === [DEBUG] PCI: 00:00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff [DEBUG] PCI: 00:00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done [DEBUG] PCI: 00:00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff [DEBUG] PCI: 00:00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff done [DEBUG] PCI: 00:00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff [DEBUG] PCI: 00:00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done [INFO ] === Resource allocator: DOMAIN: 00000000 - Pass 2 (allocating resources) === [DEBUG] DOMAIN: 00000000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff [DEBUG] avoid_fixed_resources: PCI: 00:00:1f.0 00 base 00000000 limit 00000fff io (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:1f.0 84 base 00000080 limit 0000008f io (fixed) [DEBUG] avoid_fixed_resources: PNP: 002e.2 60 base 000003f8 limit 000003ff io (fixed) [DEBUG] avoid_fixed_resources: PNP: 002e.a 60 base 00000a10 limit 00000a17 io (fixed) [DEBUG] avoid_fixed_resources: PNP: 002e.b 60 base 00000a20 limit 00000a27 io (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:1f.2 40 base 00001800 limit 000018ff io (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:1f.4 20 base 0000efa0 limit 0000efbf io (fixed) [INFO ] DOMAIN: 00000000: Resource ranges: [INFO ] * Base: 1000, Size: 800, Tag: 100 [INFO ] * Base: 1900, Size: d6a0, Tag: 100 [INFO ] * Base: efc0, Size: 1040, Tag: 100 [DEBUG] PCI: 00:00:02.0 20 * [0x1000 - 0x103f] limit: 103f io [DEBUG] PCI: 00:00:17.0 20 * [0x1040 - 0x105f] limit: 105f io [DEBUG] PCI: 00:00:17.0 18 * [0x1060 - 0x1067] limit: 1067 io [DEBUG] PCI: 00:00:17.0 1c * [0x1068 - 0x106b] limit: 106b io [DEBUG] DOMAIN: 00000000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done [DEBUG] DOMAIN: 00000000 mem: base: 7b000000 size: 0 align: 0 gran: 0 limit: dfffffff [DEBUG] DOMAIN: 00000000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 00 base e0000000 limit efffffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 01 base fed10000 limit fed17fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 02 base fed18000 limit fed18fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 03 base fed19000 limit fed19fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 04 base fed84000 limit fed84fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 05 base fed80000 limit fed83fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 06 base fed90000 limit fed90fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 07 base fed91000 limit fed91fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 08 base 00000000 limit 0009ffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 09 base 000c0000 limit 7affffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 0a base 7b000000 limit 7fffffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 0b base 100000000 limit 27dffffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 0c base 000a0000 limit 000bffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:00.0 0d base 000c0000 limit 000fffff mem (fixed) [DEBUG] avoid_fixed_resources: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:1f.1 10 base fd000000 limit fdffffff mem (fixed) [DEBUG] avoid_fixed_resources: PCI: 00:00:1f.2 48 base fe000000 limit fe00ffff mem (fixed) [INFO ] DOMAIN: 00000000: Resource ranges: [INFO ] * Base: 80000000, Size: 60000000, Tag: 200 [INFO ] * Base: 27e000000, Size: 7d82000000, Tag: 200 [DEBUG] PCI: 00:00:02.0 18 * [0x80000000 - 0x8fffffff] limit: 8fffffff prefmem [DEBUG] PCI: 00:00:02.0 10 * [0x90000000 - 0x90ffffff] limit: 90ffffff mem [DEBUG] PCI: 00:00:1f.6 10 * [0x91000000 - 0x9101ffff] limit: 9101ffff mem [DEBUG] PCI: 00:00:14.0 10 * [0x91020000 - 0x9102ffff] limit: 9102ffff mem [DEBUG] PCI: 00:00:1f.3 20 * [0x91030000 - 0x9103ffff] limit: 9103ffff mem [DEBUG] PCI: 00:00:04.0 10 * [0x91040000 - 0x91047fff] limit: 91047fff mem [DEBUG] PCI: 00:00:1f.2 10 * [0x91048000 - 0x9104bfff] limit: 9104bfff mem [DEBUG] PCI: 00:00:1f.3 10 * [0x9104c000 - 0x9104ffff] limit: 9104ffff mem [DEBUG] PCI: 00:00:17.0 10 * [0x91050000 - 0x91051fff] limit: 91051fff mem [DEBUG] PCI: 00:00:08.0 10 * [0x91052000 - 0x91052fff] limit: 91052fff mem [DEBUG] PCI: 00:00:14.2 10 * [0x91053000 - 0x91053fff] limit: 91053fff mem [DEBUG] PCI: 00:00:16.0 10 * [0x91054000 - 0x91054fff] limit: 91054fff mem [DEBUG] PCI: 00:00:17.0 24 * [0x91055000 - 0x910557ff] limit: 910557ff mem [DEBUG] PCI: 00:00:17.0 14 * [0x91056000 - 0x910560ff] limit: 910560ff mem [DEBUG] PCI: 00:00:1f.4 10 * [0x91057000 - 0x910570ff] limit: 910570ff mem [DEBUG] DOMAIN: 00000000 mem: base: 7b000000 size: 0 align: 0 gran: 0 limit: dfffffff done [DEBUG] DOMAIN: 00000000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff done [INFO ] === Resource allocator: DOMAIN: 00000000 - resource allocation complete === [DEBUG] PCI: 00:00:02.0 10 <- [0x0000000090000000 - 0x0000000090ffffff] size 0x01000000 gran 0x18 mem64 [DEBUG] PCI: 00:00:02.0 18 <- [0x0000000080000000 - 0x000000008fffffff] size 0x10000000 gran 0x1c prefmem64 [DEBUG] PCI: 00:00:02.0 20 <- [0x0000000000001000 - 0x000000000000103f] size 0x00000040 gran 0x06 io [DEBUG] PCI: 00:00:04.0 10 <- [0x0000000091040000 - 0x0000000091047fff] size 0x00008000 gran 0x0f mem64 [DEBUG] PCI: 00:00:08.0 10 <- [0x0000000091052000 - 0x0000000091052fff] size 0x00001000 gran 0x0c mem64 [DEBUG] PCI: 00:00:14.0 10 <- [0x0000000091020000 - 0x000000009102ffff] size 0x00010000 gran 0x10 mem64 [DEBUG] PCI: 00:00:14.2 10 <- [0x0000000091053000 - 0x0000000091053fff] size 0x00001000 gran 0x0c mem64 [DEBUG] PCI: 00:00:16.0 10 <- [0x0000000091054000 - 0x0000000091054fff] size 0x00001000 gran 0x0c mem64 [DEBUG] PCI: 00:00:17.0 10 <- [0x0000000091050000 - 0x0000000091051fff] size 0x00002000 gran 0x0d mem [DEBUG] PCI: 00:00:17.0 14 <- [0x0000000091056000 - 0x00000000910560ff] size 0x00000100 gran 0x08 mem [DEBUG] PCI: 00:00:17.0 18 <- [0x0000000000001060 - 0x0000000000001067] size 0x00000008 gran 0x03 io [DEBUG] PCI: 00:00:17.0 1c <- [0x0000000000001068 - 0x000000000000106b] size 0x00000004 gran 0x02 io [DEBUG] PCI: 00:00:17.0 20 <- [0x0000000000001040 - 0x000000000000105f] size 0x00000020 gran 0x05 io [DEBUG] PCI: 00:00:17.0 24 <- [0x0000000091055000 - 0x00000000910557ff] size 0x00000800 gran 0x0b mem [DEBUG] PCI: 00:00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c seg 00 buio [DEBUG] PCI: 00:00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 seg 00 buprefmem [DEBUG] PCI: 00:00:1c.0 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 seg 00 bumem [DEBUG] PNP: 002e.2 60 <- [0x00000000000003f8 - 0x00000000000003ff] size 0x00000008 gran 0x03 io [DEBUG] PNP: 002e.2 70 <- [0x0000000000000003 - 0x0000000000000003] size 0x00000001 gran 0x00 irq [NOTE ] PNP: 002e.2 f0 irq size: 0x0000000001 not assigned in devicetree [DEBUG] PNP: 002e.a 60 <- [0x0000000000000a10 - 0x0000000000000a17] size 0x00000008 gran 0x03 io [NOTE ] PNP: 002e.a 70 irq size: 0x0000000001 not assigned in devicetree [DEBUG] PNP: 002e.b 60 <- [0x0000000000000a20 - 0x0000000000000a27] size 0x00000008 gran 0x03 io [NOTE ] PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree [DEBUG] PNP: 002e.e e4 <- [0x0000000000000010 - 0x000000000000000f] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.e e5 <- [0x0000000000000009 - 0x0000000000000008] size 0x00000000 gran 0x00 irq [DEBUG] LPC: enabling default decode range LPC_IOE_COMA_EN [DEBUG] LPC: Opened IO window LGIR1: base a10 size 8 [DEBUG] LPC: Opened IO window LGIR2: base a20 size 8 [DEBUG] PCI: 00:00:1f.2 10 <- [0x0000000091048000 - 0x000000009104bfff] size 0x00004000 gran 0x0e mem [DEBUG] PCI: 00:00:1f.3 10 <- [0x000000009104c000 - 0x000000009104ffff] size 0x00004000 gran 0x0e mem64 [DEBUG] PCI: 00:00:1f.3 20 <- [0x0000000091030000 - 0x000000009103ffff] size 0x00010000 gran 0x10 mem64 [DEBUG] PCI: 00:00:1f.4 10 <- [0x0000000091057000 - 0x00000000910570ff] size 0x00000100 gran 0x08 mem64 [DEBUG] PCI: 00:00:1f.6 10 <- [0x0000000091000000 - 0x000000009101ffff] size 0x00020000 gran 0x11 mem [INFO ] Done setting resources. [INFO ] Done allocating resources. [DEBUG] BS: BS_DEV_RESOURCES run times (exec / console): 3 / 961 ms [INFO ] Enabling resources... [DEBUG] PCI: 00:00:00.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:00.0 cmd <- 06 [DEBUG] PCI: 00:00:02.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:02.0 cmd <- 03 [DEBUG] PCI: 00:00:04.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:04.0 cmd <- 02 [DEBUG] PCI: 00:00:08.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:08.0 cmd <- 06 [DEBUG] PCI: 00:00:14.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:14.0 cmd <- 02 [DEBUG] PCI: 00:00:14.2 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:14.2 cmd <- 02 [DEBUG] PCI: 00:00:16.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:16.0 cmd <- 02 [DEBUG] PCI: 00:00:17.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:17.0 cmd <- 03 [DEBUG] PCI: 00:00:1c.0 bridge ctrl <- 0013 [DEBUG] PCI: 00:00:1c.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:1c.0 cmd <- 00 [DEBUG] PCI: 00:00:1f.0 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:1f.0 cmd <- 07 [DEBUG] PCI: 00:00:1f.2 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:1f.2 cmd <- 06 [DEBUG] PCI: 00:00:1f.3 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:1f.3 cmd <- 02 [DEBUG] PCI: 00:00:1f.4 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:1f.4 cmd <- 03 [DEBUG] PCI: 00:00:1f.6 subsystem <- 17aa/30d0 [DEBUG] PCI: 00:00:1f.6 cmd <- 02 [INFO ] done. [DEBUG] BS: BS_DEV_ENABLE run times (exec / console): 0 / 139 ms [DEBUG] ME: Version: 11.0.2.1003 [DEBUG] BS: BS_DEV_ENABLE exit times (exec / console): 37 / 4 ms [INFO ] Initializing devices... [DEBUG] PCI: 00:00:00.0 init [INFO ] CPU TDP = 51 Watts [INFO ] CPU PL1 = 51 Watts [INFO ] CPU PL2 = 65 Watts [DEBUG] PCI: 00:00:00.0 init finished in 10 msecs [DEBUG] PCI: 00:00:02.0 init [INFO ] CBFS: Found 'vbt.bin' @0xca340 size 0x47e in mcache @0x7abdc1e4 [INFO ] Found a VBT of 4608 bytes [INFO ] GMA: Found VBT in CBFS [INFO ] GMA: Found valid VBT in CBFS [INFO ] framebuffer_info: bytes_per_line: 7680, bits_per_pixel: 32 [INFO ] x_res x y_res: 1920 x 1200, size: 9216000 at 0x80000000 [DEBUG] PCI: 00:00:02.0 init finished in 178 msecs [DEBUG] PCI: 00:00:04.0 init [DEBUG] PCI: 00:00:04.0 init finished in 0 msecs [DEBUG] PCI: 00:00:08.0 init [DEBUG] PCI: 00:00:08.0 init finished in 0 msecs [DEBUG] PCI: 00:00:14.0 init [DEBUG] PCI: 00:00:14.0 init finished in 0 msecs [DEBUG] PCI: 00:00:14.2 init [DEBUG] PCI: 00:00:14.2 init finished in 0 msecs [DEBUG] PCI: 00:00:16.0 init [DEBUG] PCI: 00:00:16.0 init finished in 0 msecs [DEBUG] PCI: 00:00:1c.0 init [DEBUG] Initializing PCH PCIe bridge. [DEBUG] PCI: 00:00:1c.0 init finished in 4 msecs [DEBUG] PCI: 00:00:1f.0 init [DEBUG] IOAPIC: Initializing IOAPIC at fec00000 [DEBUG] IOAPIC: ID = 0x00 [DEBUG] IOAPIC: 120 interrupts [DEBUG] IOAPIC: Clearing IOAPIC at fec00000 [DEBUG] IOAPIC: Bootstrap Processor Local APIC = 0x00 [DEBUG] PCI: 00:00:1f.0 init finished in 23 msecs [DEBUG] PCI: 00:00:1f.2 init [DEBUG] RTC Init [INFO ] Set power on after power failure. [DEBUG] apm_control: Disabling ACPI. [DEBUG] APMC done. [DEBUG] Disabling Deep S3 [DEBUG] Disabling Deep S3 [DEBUG] Enabling Deep S4 [DEBUG] Enabling Deep S4 [DEBUG] Enabling Deep S5 [DEBUG] Enabling Deep S5 [DEBUG] PCI: 00:00:1f.2 init finished in 35 msecs [DEBUG] PCI: 00:00:1f.3 init [DEBUG] azalia_audio: base = 0x9104c000 [DEBUG] azalia_audio: codec_mask = 0x06 [DEBUG] azalia_audio: initializing codec #2... [DEBUG] azalia_audio: - vendor/device id: 0x8086280b [DEBUG] azalia_audio: - no verb! [DEBUG] azalia_audio: initializing codec #1... [DEBUG] azalia_audio: - vendor/device id: 0x10ec0233 [DEBUG] azalia_audio: - verb size: 44 [DEBUG] azalia_audio: - verb loaded [DEBUG] PCI: 00:00:1f.3 init finished in 48 msecs [DEBUG] PCI: 00:00:1f.4 init [DEBUG] PCI: 00:00:1f.4 init finished in 0 msecs [DEBUG] PCI: 00:00:1f.6 init [DEBUG] PCI: 00:00:1f.6 init finished in 0 msecs [DEBUG] PNP: 002e.2 init [DEBUG] PNP: 002e.2 init finished in 0 msecs [DEBUG] PNP: 002e.a init [INFO ] set power on after power fail [DEBUG] PNP: 002e.a init finished in 5 msecs [DEBUG] PNP: 002e.b init [DEBUG] PNP: 002e.b init finished in 0 msecs [DEBUG] PNP: 002e.e init [DEBUG] PNP: 002e.e init finished in 0 msecs [INFO ] Devices initialized [DEBUG] BS: BS_DEV_INIT run times (exec / console): 155 / 307 ms [DEBUG] TPM: Startup [DEBUG] TPM: command 0x99 returned 0x0 [DEBUG] TPM: Asserting physical presence [DEBUG] TPM: command 0x4000000a returned 0x0 [DEBUG] TPM: command 0x65 returned 0x0 [DEBUG] TPM: flags disable=0, deactivated=0, nvlocked=1 [INFO ] TPM: setup succeeded [DEBUG] BS: BS_DEV_INIT exit times (exec / console): 3 / 31 ms [INFO ] Finalize devices... [DEBUG] PCI: 00:00:02.0 final [DEBUG] PCI: 00:00:16.0 final [DEBUG] PCI: 00:00:17.0 final [DEBUG] PCI: 00:00:1f.2 final [DEBUG] PCI: 00:00:1f.4 final [INFO ] Devices finalized [DEBUG] BS: BS_POST_DEVICE run times (exec / console): 0 / 25 ms [INFO ] CBFS: Found 'fallback/dsdt.aml' @0xc73c0 size 0x2f48 in mcache @0x7abdc1b8 [WARN ] CBFS: 'fallback/slic' not found. [INFO ] ACPI: Writing ACPI tables at 7aa00000. [DEBUG] ACPI: * FACS [DEBUG] SCI is IRQ 9, GSI 9 [DEBUG] ACPI: * FACP [DEBUG] ACPI: added table 1/32, length now 44 [DEBUG] Found 1 CPU(s) with 2/4 physical/logical core(s) each. [DEBUG] PSS: 3900MHz power 51000 control 0x2700 status 0x2700 [DEBUG] PSS: 3800MHz power 49077 control 0x2600 status 0x2600 [DEBUG] PSS: 3300MHz power 40212 control 0x2100 status 0x2100 [DEBUG] PSS: 2800MHz power 32105 control 0x1c00 status 0x1c00 [DEBUG] PSS: 2300MHz power 24812 control 0x1700 status 0x1700 [DEBUG] PSS: 1800MHz power 18221 control 0x1200 status 0x1200 [DEBUG] PSS: 1300MHz power 12329 control 0xd00 status 0xd00 [DEBUG] PSS: 800MHz power 7088 control 0x800 status 0x800 [DEBUG] PSS: 3900MHz power 51000 control 0x2700 status 0x2700 [DEBUG] PSS: 3800MHz power 49077 control 0x2600 status 0x2600 [DEBUG] PSS: 3300MHz power 40212 control 0x2100 status 0x2100 [DEBUG] PSS: 2800MHz power 32105 control 0x1c00 status 0x1c00 [DEBUG] PSS: 2300MHz power 24812 control 0x1700 status 0x1700 [DEBUG] PSS: 1800MHz power 18221 control 0x1200 status 0x1200 [DEBUG] PSS: 1300MHz power 12329 control 0xd00 status 0xd00 [DEBUG] PSS: 800MHz power 7088 control 0x800 status 0x800 [DEBUG] PSS: 3900MHz power 51000 control 0x2700 status 0x2700 [DEBUG] PSS: 3800MHz power 49077 control 0x2600 status 0x2600 [DEBUG] PSS: 3300MHz power 40212 control 0x2100 status 0x2100 [DEBUG] PSS: 2800MHz power 32105 control 0x1c00 status 0x1c00 [DEBUG] PSS: 2300MHz power 24812 control 0x1700 status 0x1700 [DEBUG] PSS: 1800MHz power 18221 control 0x1200 status 0x1200 [DEBUG] PSS: 1300MHz power 12329 control 0xd00 status 0xd00 [DEBUG] PSS: 800MHz power 7088 control 0x800 status 0x800 [DEBUG] PSS: 3900MHz power 51000 control 0x2700 status 0x2700 [DEBUG] PSS: 3800MHz power 49077 control 0x2600 status 0x2600 [DEBUG] PSS: 3300MHz power 40212 control 0x2100 status 0x2100 [DEBUG] PSS: 2800MHz power 32105 control 0x1c00 status 0x1c00 [DEBUG] PSS: 2300MHz power 24812 control 0x1700 status 0x1700 [DEBUG] PSS: 1800MHz power 18221 control 0x1200 status 0x1200 [DEBUG] PSS: 1300MHz power 12329 control 0xd00 status 0xd00 [DEBUG] PSS: 800MHz power 7088 control 0x800 status 0x800 [DEBUG] PCI space above 4GB MMIO is at 0x27e000000, len = 0x7d82000000 [DEBUG] Empty min sleep state array returned [INFO ] Returning default LPI constraint package [INFO ] _SB.PCI0.PEPD: Intel Power Engine Plug-in [INFO ] _SB.PCI0.RP01: WIFI Device GENERIC: 0.0 [DEBUG] PPI: Pending OS request: 0x78c18f7c (0x68f0031f) [DEBUG] PPI: OS response: CMD 0x7081873c = 0x60f0021f [INFO ] _SB_.PCI0.TPM: LPC TPM PNP: 0c31.0 [DEBUG] ACPI: * SSDT [DEBUG] ACPI: added table 2/32, length now 52 [DEBUG] ACPI: * MCFG [DEBUG] ACPI: added table 3/32, length now 60 [DEBUG] TCPA log created at 0x7a9f0000 [DEBUG] ACPI: * TCPA [DEBUG] ACPI: added table 4/32, length now 68 [DEBUG] ACPI: * LPIT [DEBUG] ACPI: added table 5/32, length now 76 [DEBUG] IOAPIC: 120 interrupts [DEBUG] SCI is IRQ 9, GSI 9 [DEBUG] ACPI: * APIC [DEBUG] ACPI: added table 6/32, length now 84 [DEBUG] ACPI: * SPCR [DEBUG] ACPI: added table 7/32, length now 92 [DEBUG] current = 7aa047b0 [DEBUG] ACPI: * DMAR [DEBUG] ACPI: added table 8/32, length now 100 [DEBUG] acpi_write_dbg2_pci_uart: Device not found [DEBUG] ACPI: * HPET [DEBUG] ACPI: added table 9/32, length now 108 [INFO ] ACPI: done. [DEBUG] ACPI tables: 18560 bytes. [DEBUG] smbios_write_tables: 7a9e8000 [DEBUG] SMBIOS firmware version is set to coreboot_version: '24.08-272-g735ca7f24ad4' [INFO ] Create SMBIOS type 16 [INFO ] Create SMBIOS type 17 [INFO ] Create SMBIOS type 20 [INFO ] GENERIC: 0.0 (WIFI Device) [DEBUG] SMBIOS tables: 1075 bytes. [DEBUG] Writing table forward entry at 0x00000500 [DEBUG] Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 453c [DEBUG] Writing coreboot table at 0x7aa24000 [DEBUG] 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES [DEBUG] 1. 0000000000001000-000000000009ffff: RAM [DEBUG] 2. 00000000000a0000-00000000000fffff: RESERVED [DEBUG] 3. 0000000000100000-000000007a9e7fff: RAM [DEBUG] 4. 000000007a9e8000-000000007aa7efff: CONFIGURATION TABLES [DEBUG] 5. 000000007aa7f000-000000007abccfff: RAMSTAGE [DEBUG] 6. 000000007abcd000-000000007affffff: CONFIGURATION TABLES [DEBUG] 7. 000000007b000000-000000007fffffff: RESERVED [DEBUG] 8. 00000000e0000000-00000000efffffff: RESERVED [DEBUG] 9. 00000000fd000000-00000000fe00ffff: RESERVED [DEBUG] 10. 00000000fed10000-00000000fed19fff: RESERVED [DEBUG] 11. 00000000fed40000-00000000fed44fff: RESERVED [DEBUG] 12. 00000000fed80000-00000000fed84fff: RESERVED [DEBUG] 13. 00000000fed90000-00000000fed91fff: RESERVED [DEBUG] 14. 0000000100000000-000000027dffffff: RAM [DEBUG] FMAP: area SMMSTORE found @ 810000 (262144 bytes) [DEBUG] smm store: 4 # blocks with size 0x10000 [DEBUG] Wrote coreboot table at: 0x7aa24000, 0x534 bytes, checksum 3a46 [DEBUG] coreboot table: 1356 bytes. [DEBUG] IMD ROOT 0. 0x7afff000 0x00001000 [DEBUG] IMD SMALL 1. 0x7affe000 0x00001000 [DEBUG] FSP MEMORY 2. 0x7abfe000 0x00400000 [DEBUG] CONSOLE 3. 0x7abde000 0x00020000 [DEBUG] TIME STAMP 4. 0x7abdd000 0x00000910 [DEBUG] RO MCACHE 5. 0x7abdc000 0x00000364 [DEBUG] MEM INFO 6. 0x7abdb000 0x00000f48 [DEBUG] AFTER CAR 7. 0x7abcd000 0x0000e000 [DEBUG] RAMSTAGE 8. 0x7aa7e000 0x0014f000 [DEBUG] REFCODE 9. 0x7aa50000 0x0002e000 [DEBUG] SMM BACKUP 10. 0x7aa40000 0x00010000 [DEBUG] SMM COMBUFFER11. 0x7aa30000 0x00010000 [DEBUG] IGD OPREGION12. 0x7aa2c000 0x000030c8 [DEBUG] COREBOOT 13. 0x7aa24000 0x00008000 [DEBUG] ACPI 14. 0x7aa00000 0x00024000 [DEBUG] TCPA TCGLOG15. 0x7a9f0000 0x00010000 [DEBUG] SMBIOS 16. 0x7a9e8000 0x00008000 [DEBUG] IMD small region: [DEBUG] IMD ROOT 0. 0x7affec00 0x00000400 [DEBUG] POWER STATE 1. 0x7affebc0 0x00000040 [DEBUG] FMAP 2. 0x7affea20 0x00000188 [DEBUG] FSP RUNTIME 3. 0x7affea00 0x00000004 [DEBUG] FSPM VERSION 4. 0x7affe9e0 0x00000004 [DEBUG] ROMSTAGE 5. 0x7affe9c0 0x00000004 [DEBUG] ROMSTG STCK 6. 0x7affe900 0x000000a8 [DEBUG] ACPI GNVS 7. 0x7affe8c0 0x00000038 [DEBUG] TPM PPI 8. 0x7affe760 0x0000015a [DEBUG] BS: BS_WRITE_TABLES run times (exec / console): 3 / 682 ms [INFO ] LAPIC 0x0 in XAPIC mode. [DEBUG] MTRR: Physical address space: [DEBUG] 0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6 [DEBUG] 0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0 [DEBUG] 0x00000000000c0000 - 0x000000007affffff size 0x7af40000 type 6 [DEBUG] 0x000000007b000000 - 0x000000007fffffff size 0x05000000 type 0 [DEBUG] 0x0000000080000000 - 0x000000008fffffff size 0x10000000 type 1 [DEBUG] 0x0000000090000000 - 0x00000000ffffffff size 0x70000000 type 0 [DEBUG] 0x0000000100000000 - 0x000000027dffffff size 0x17e000000 type 6 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606 [DEBUG] apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606 [DEBUG] apic_id 0x0 setup mtrr for CPU physical address size: 39 bits [DEBUG] MTRR: default type WB/UC MTRR counts: 6/6. [DEBUG] MTRR: UC selected as default type. [DEBUG] MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 [DEBUG] MTRR: 1 base 0x000000007b000000 mask 0x0000007fff000000 type 0 [DEBUG] MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0 [DEBUG] MTRR: 3 base 0x0000000080000000 mask 0x0000007ff0000000 type 1 [DEBUG] MTRR: 4 base 0x0000000100000000 mask 0x0000007f00000000 type 6 [DEBUG] MTRR: 5 base 0x0000000200000000 mask 0x0000007f80000000 type 6 [INFO ] LAPIC 0x1 in XAPIC mode. [INFO ] LAPIC 0x2 in XAPIC mode. [INFO ] LAPIC 0x3 in XAPIC mode. [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x250 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x258 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x259 0x0000000000000000 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x268 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x269 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x26a 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x26b 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x26c 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x26d 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x26e 0x0606060606060606 [DEBUG] apic_id 0x2: MTRR: Fixed MSR 0x26f 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x250 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x258 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x259 0x0000000000000000 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x268 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x269 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x26a 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x26b 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x26c 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x26d 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x26e 0x0606060606060606 [DEBUG] apic_id 0x1: MTRR: Fixed MSR 0x26f 0x0606060606060606 [DEBUG] apic_id 0x2 setup mtrr for CPU physical address size: 39 bits [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x250 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x258 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x259 0x0000000000000000 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x268 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x269 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x26a 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x26b 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x26c 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x26d 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x26e 0x0606060606060606 [DEBUG] apic_id 0x3: MTRR: Fixed MSR 0x26f 0x0606060606060606 [DEBUG] apic_id 0x1 setup mtrr for CPU physical address size: 39 bits [DEBUG] apic_id 0x3 setup mtrr for CPU physical address size: 39 bits [DEBUG] MTRR: TEMPORARY Physical address space: [DEBUG] 0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6 [DEBUG] 0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0 [DEBUG] 0x00000000000c0000 - 0x000000007affffff size 0x7af40000 type 6 [DEBUG] 0x000000007b000000 - 0x00000000ff7fffff size 0x84800000 type 0 [DEBUG] 0x00000000ff800000 - 0x00000000ffffffff size 0x00800000 type 5 [DEBUG] 0x0000000100000000 - 0x000000027dffffff size 0x17e000000 type 6 [DEBUG] MTRR: default type WB/UC MTRR counts: 11/6. [DEBUG] MTRR: UC selected as default type. [DEBUG] MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 [DEBUG] MTRR: 1 base 0x000000007b000000 mask 0x0000007fff000000 type 0 [DEBUG] MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0 [DEBUG] MTRR: 3 base 0x00000000ff800000 mask 0x0000007fff800000 type 5 [DEBUG] MTRR: 4 base 0x0000000100000000 mask 0x0000007f00000000 type 6 [DEBUG] MTRR: 5 base 0x0000000200000000 mask 0x0000007f80000000 type 6
[DEBUG] MTRR check [DEBUG] Fixed MTRRs : Enabled [DEBUG] Variable MTRRs: Enabled
[DEBUG] BS: BS_WRITE_TABLES exit times (exec / console): 205 / 308 ms [INFO ] CBFS: Found 'fallback/payload' @0x1586c0 size 0x151e6b in mcache @0x7abdc2f4 [DEBUG] Checking segment from ROM address 0xff9a88ec [DEBUG] Checking segment from ROM address 0xff9a8908 [DEBUG] Loading segment from ROM address 0xff9a88ec [DEBUG] code (compression=1) [DEBUG] New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xff9a8924 filesize 0x151e33 [DEBUG] Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x0000000000151e33 [DEBUG] using LZMA [DEBUG] Loading segment from ROM address 0xff9a8908 [DEBUG] Entry Point 0x008016da [DEBUG] BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 60 ms [DEBUG] Finalizing chipset. [DEBUG] ME: Host Firmware Status Register 1 : 0x90000245 [DEBUG] ME: Host Firmware Status Register 2 : 0x83108106 [DEBUG] ME: Host Firmware Status Register 3 : 0x00000300 [DEBUG] ME: Host Firmware Status Register 4 : 0x00084000 [DEBUG] ME: Host Firmware Status Register 5 : 0x00000000 [DEBUG] ME: Host Firmware Status Register 6 : 0x40000000 [DEBUG] ME: FW Partition Table : OK [DEBUG] ME: Bringup Loader Failure : NO [DEBUG] ME: Firmware Init Complete : YES [DEBUG] ME: Manufacturing Mode : NO [DEBUG] ME: Boot Options Present : NO [DEBUG] ME: Update In Progress : NO [DEBUG] ME: D3 Support : NO [DEBUG] ME: D0i3 Support : YES [DEBUG] ME: Low Power State Enabled : NO [DEBUG] ME: CPU Replaced : NO [DEBUG] ME: CPU Replacement Valid : YES [DEBUG] ME: Current Working State : Normal [DEBUG] ME: Current Operation State : M0 with UMA [DEBUG] ME: Current Operation Mode : Normal [DEBUG] ME: Error Code : No Error [DEBUG] ME: Progress Phase : Unknown (8) [DEBUG] ME: Power Management Event : Global reset after an error [DEBUG] ME: Progress Phase State : Unknown phase: 0x08 state: 0x10 [DEBUG] ME: Power Down Mitigation : NO [DEBUG] ME: Firmware SKU : Unknown (0x0) [DEBUG] ME: FPF status : fused [DEBUG] apm_control: Finalizing SMM. [DEBUG] APMC done. [DEBUG] BS: BS_PAYLOAD_LOAD exit times (exec / console): 10 / 153 ms [DEBUG] mp_park_aps done after 0 msecs. [DEBUG] Jumping to boot code at 0x008016da(0x7aa24000)`
I tried many many parameters, but results are always the same.