* YhLu YhLu@tyan.com [030908 18:55]:
HyperT reset needed HyperT reset not needed
In the scan_hypertranport_chain.c missed one "else"
YH.
./src/devices/hypertransport.c:hypertransport_scan_chain() should do the right thing, i.e. trigger a reset. And it seems the reset should go to PCIDEV(1,4,0), as on all other hammer boards. But obviously the code does not do a reset, or does it continue at the same PC afterwards?
SMBus controller enabled Ram1.00 setting up CPU00 northbridge registers done. Ram2.00
How can i verify that the smbus channels LinuxBIOS uses are correct for my board? The old solos only found RAM in the first socket it seems.
Hyper transport scan link: 0 max: 1 PCI: 01:01.0 [1022/7454] enabled next_unitid: 0004 PCI: 01:04.0 [1022/7460] enabled next_unitid: 0008 HyperT reset needed
[ LinuxBIOS should restart HERE ]
HyperT reset not needed PCI: pci_scan_bus for bus 1 PCI: 01:01.0 [1022/7454] ops
[..]
Stefan