On 5/1/07, Uwe Hermann uwe@hermann-uwe.de wrote:
On Tue, May 01, 2007 at 04:48:29PM -0600, Marc Jones wrote:
This patch adds support for the AMD Norwich development platform based on the Geode LX processor. The Norwich is the canonical Geode reference, and will server as a good basis for other Geode based platforms.
So is this a physically existing product or merely a development board/prototype? I'm asking because I'd like to know into which category this should go later in the wiki:
I'd say put it in as supported.
+#define POST_CODE(x) outb(x, 0x80)
Why this? We have a post_code() function in src/console/console.c.
Marc, is it possible to use the standard one? (There may be a reason for the macro, if so, leave it in)
SystemPreInit();[...]
pll_reset(ManualConf);cpuRegInit();
Those names may be the fault of Ollie or me, not sure; Marc, change if you wish.
So, I'm with Peter, I'd go for the Acked-by: Ronald G. Minnich rminnich@gmail.com and, Marc, consider either a new patch with Uwe's recommendations or fixup later. But I don't want to delay getting this in; there are some customers waiting for it, literally daily.
thanks
ron