Hi, all,
I am new in coreboot. Now for fasting boot, I want to install coreboot to a PC104 computer. I wonder whether it is supported by the coreboot. The following is some information of the martherboard, 1. Vendor: NORCO 2. Mainboard:EMB-3680 3. Northbridge: AMD Geode� LX 800 4. Southbridge: AMD Geode� CS5536 5. Super I/O: Winbond� W83627HG 6. CPU: AMD Geode LX-800-500MHz 7. Home page: http://www.norco.cn/ArticleShow.asp?ArticleID=31&BigClassName=Embedded%2...
And run �lspci�, it displays, 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 33) 00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video 00:0c.0 Bridge: Integrated Technology Express, Inc. IT8888F/G PCI to ISA Bridge with SMB [Golden Gate] (rev 03) 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03) 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01) 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) 00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
From the supported boards list of coreboot website, this PC104 computer is the most similar to �IEI IEI PCISA-LX-800-R10� in coreboot v2, except the supper I/O is W83627EHG.
Based on the above mentioned points, can I follow the tutorial of �IEI IEI PCISA-LX-800-R10� to install the coreboot v2 to PC104 computer? And any hint?
Thank you for any input?
2010-01-06
Gavin