Hi, Thanks for the response. But my concern is how do I get output of LinuxBIOS on the serial. Can I disable the service processor output by doing a platform after logging into the SP? I am not sure if the LinuxBIOS code itself is running. Is there a way to confirm that, other than checking the serial?
Regards Anil
On 7/14/06, Stefan Reinauer stepan@coresystems.de wrote:
- Anil B G bg.anil@gmail.com [060714 17:14]:
I also managed to try loading the same on a khepri board that I could
lay my
hands on. However the system did not boot . Is there a way to enable some beep()
or
something similar early on to know that the processor has started executing the LinuxBIOS code. I do not have a
scope or
other hardware that I could use to probe. There was some output on the serial but that from the service processor that my khepri board has.
The Sun Fire V20z AKA Newisys 2100 AKA Newisys Khepri has a very nice PPC based service processor that can grab the serial output as well as the port80 post code.
Type "platform" after logging in to the service CPU with ssh.
There's also a trick to become root on the SP itself. If you put the machine serial port to be grabbed by the SP, the SP serial port will be sent to the physical serial connector and you get a ppcboot screen..
Unfortunately the Newisys 2100 I have is running linuxbios.org now, so I dont really dare reflashing it remotely. ;-)
Stefan
-- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info@coresystems.de • http://www.coresystems.de/