[LinuxBIOS] trying to boot Gigabyte M575SLI

[Quux]

yo dudes,

this is good to know. too bad, elitegroup top hat flash does not work on 
M57. maybe thf requires a fwh instead of lpc or particular circuitry on 
the mainboard. so I got to put a socket on as well ...

Andreas B. Mundt schrieb:
> Hello everybody!
>
> Encouraged by the reported success with the Gigabyte M57SLI-S4 
> (Many thanks to all contributers!), I started to try this board as well.
> I followed ST's instructions with the 2nd socket and the pull-down/switch. 
> This worked quite fine for me. Two things can perhaps be added to ST's
> instructions/wiki:
> I used a 100k standard resistor (no SMD!)
> the pull-down current to ground is in both cases about 0.033mA.