Li-Ta Lo ollie@lanl.gov writes:
On Sat, 2004-10-16 at 11:03, Yinghai Lu wrote:
So chip tree is merged into device tree.
I'm eager to convert my MB to use that.
Is there any problem for different inherent links in second K8?
I am a little bit confused with that too. I think now the 'link' keyword is not used anymore, the device enumeration code will put the 2nd northbridge on the right LDT accroding to the early HT enumertion.
Sorry, for not making this clearer. Look at the generated static.c if my following explanation does not clear things up.
The device tree from the HDAMA mainboard Config.lb is below: The first time device pci 18.0 is mentioned that is link[0] in for the device. The second time is link[1] the third time is link[2]...
And then the amdk8 code maps link[0] to LDT0 link[1] to LD[1 and link[2] to LDT2.
A similar condition exists for the phillips pca9545 i2c switch. It only has one register but it has 4 downstream ports.
We may want to do something cleaner than just repeating the device once for each ``link/bus'' but for now that works.
Eric
chip northbridge/amd/amdk8 device pci_domain 0 on device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory device pci 0.0 on end device pci 0.1 on end device pci 1.0 on end device pci 1.1 on end end chip southbridge/amd/amd8111 # this "device pci 0.0" is the parent the next one # PCI bridge device pci 0.0 on device pci 0.0 on end device pci 0.1 on end device pci 0.2 on end device pci 1.0 off end end device pci 1.0 on chip superio/NSC/pc87360 device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end device pnp 2e.2 off # Com 2 io 0x60 = 0x2f8 irq 0x70 = 3 end device pnp 2e.3 on # Com 1 io 0x60 = 0x3f8 irq 0x70 = 4 end device pnp 2e.4 off end # SWC device pnp 2e.5 off end # Mouse device pnp 2e.6 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end device pnp 2e.7 off end # GPIO device pnp 2e.8 off end # ACB device pnp 2e.9 off end # FSCM device pnp 2e.a off end # WDT end end device pci 1.1 on end device pci 1.2 on end device pci 1.3 on chip drivers/generic/generic #phillips pca9545 smbus mux device i2c 70 on # analog_devices adm1026 chip drivers/generic/generic device i2c 2c on end end end device i2c 70 on end device i2c 70 on end device i2c 70 on end end chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end end chip drivers/generic/generic #dimm 0-1-1 device i2c 53 on end end chip drivers/generic/generic #dimm 1-0-0 device i2c 54 on end end chip drivers/generic/generic #dimm 1-0-1 device i2c 55 on end end chip drivers/generic/generic #dimm 1-1-0 device i2c 56 on end end chip drivers/generic/generic #dimm 1-1-1 device i2c 57 on end end end device pci 1.5 off end device pci 1.6 on end end end # device pci 18.0 device pci 18.0 on end # LDT1 device pci 18.0 on end # LDT2 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end
chip northbridge/amd/amdk8 device pci 19.0 on end device pci 19.0 on end device pci 19.0 on end device pci 19.1 on end device pci 19.2 on end device pci 19.3 on end end end device apic_cluster 0 on chip cpu/amd/socket_940 device apic 0 on end end chip cpu/amd/socket_940 device apic 1 on end end end end