On 27.08.2007 22:08, Robert Millan wrote:
On Mon, Aug 27, 2007 at 01:41:54PM +0200, Carl-Daniel Hailfinger wrote:
This patch makes ITE SuperI/O probing/dumping a little bit more generic, fixes minor codingstyle issues and prepares the table for supporting more chips of the ITE IT87xx SuperI/O family.
Tested on my two ITE-powered boards as you requested.
Thanks!
With IT8702F-A:
No SuperI/O chip found at 0x002e No SuperIO chip found at 0x002e SuperI/O found at 0x2e: id=0x8702, chipver=0x3 ITE IT8702 No SuperI/O chip found at 0x004e No SuperIO chip found at 0x004e No SuperIO chip found at 0x004e
As expected.
With IT8712F-A:
No SuperI/O chip found at 0x002e No SuperIO chip found at 0x002e SuperI/O found at 0x2e: id=0x8712, chipver=0x7 ITE IT8712 idx 07 20 21 22 23 24 2b val 09 87 12 07 01 00 00 def NA 87 12 08 00 00 00 [...]
As expected.
What sort of problems did the board with the IT8712F have? With a dump from under proprietary bios and lb, we can compare and make sure the right registers are set the way you need them.
Regards, Carl-Daniel