Eric,
The ht reset in auto.c seems not thoroughly.
And it will stuck at hard_reset in amdk8_scan_chains. ( at this time can not access 8111 yet).
Regards
YH
LinuxBIOS-1.1.62.0_Normal Tue Mar 23 17:33:50 PST 2004 starting... setting up resource map....done. 04 nodes initialized. ht reset -Ram1.00 XÀm1.01 Ram1.02 Ram1.03 Ram2.00 Ram2.01 Ram2.02 Ram2.03 Ram3 Initializing memory: done Initializing memory: done Initializing memory: done Initializing memory: done Clearing LinuxBIOS memory: done Ram4 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.62.0_Normal Tue Mar 23 17:46:40 PST 2004 booting... Finding PCI configuration type. PCI: Using configuration type 1 Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Enumerating: AMD K8 Enumerating: AMD K8 Enumerating: AMD K8 Enumerating: AMD 8111 Enumerating: Winbond w83627hf Enumerating buses...PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled PCI: 00:1a.0 [1022/1100] enabled PCI: 00:1a.1 [1022/1101] enabled PCI: 00:1a.2 [1022/1102] enabled PCI: 00:1a.3 [1022/1103] ops PCI: 00:1a.3 [1022/1103] enabled PCI: 00:1b.0 [1022/1100] enabled PCI: 00:1b.1 [1022/1101] enabled PCI: 00:1b.2 [1022/1102] enabled PCI: 00:1b.3 [1022/1103] ops PCI: 00:1b.3 [1022/1103] enabled amdk8_scan_chains max: 0 starting... Hyper transport scan link: 1 max: 1 PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 HyperT reset needed