Dear coreboot readers!
This is the automated build check service of coreboot.
The developer "ward" checked in revision 3118 to the coreboot source repository and caused the following changes:
Change Log:
Temporarily disable the fan control patch from this morning; it turns out to stop the CPU fan on the m57sli v1.1 (PLCC) entirely, which is less than desirable. I did not notice before because my board ran fine for about 15 minutes before the CPU overheated.
Thankfully the board has a good failsafe mode - it just switches off when the CPU gets too hot, without permanent damage.
I'm debugging this and plan to commit a proper fix later in the week.
This is not really trivial, but the tree is dangerous in the current state so I'm self-acking.
Signed-off-by: Ward Vandewege ward@gnu.org Acked-by: Ward Vandewege ward@gnu.org
Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3118&device=serengeti_c...
If something broke during this checkin please be a pain in ward's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, coreboot automatic build system