Hi, Peter,
These are two things I did when I use this patch (however it works on my board):
1 add a option to the flashrom command line, such as: -m iwill:dk8_htx It seems that flashrom rely on some information of LinuxBIOS in CMOS, so before the first running of LinuxBIOS, there's nothing in CMOS for LinuxBIOS, I have to add this option to make flashrom know what my mainboard is.
2 I add a new entry in the table which is a little different from Mondrian's. And I think both of these two entry are needed for different dk8-htx mainboards.
{ 0x1022, 0x7468, 0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, "iwill", "dk8_htx", "IWILL DK8-HTX", board_iwill_dk8htx },
We will appreciate if you can add this patch into the official svn. It helps a lot!
Best, Ning
On 4/25/07, Peter Stuge stuge-linuxbios@cdy.org wrote:
On Wed, Apr 25, 2007 at 04:33:25PM +0200, Mondrian Nuessle wrote:
This patch should help those people that try to use flashrom on an iwill dk8_htx board, with or without biossavior, on factory BIOS or Linuxbios.
Cool, could one more person test it so we can commit it?
//Peter
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios