hi richard,
yup, sounds pretty much like it. mine's a gx1/cs5530a combo. i just posted about my latest status. i'm starting to suspect that the ram setup might be fine. it could be that i might have somehow misconfigured my linuxbios build. i had sent an email where i detailed what i think is being copied to ram.
my config looks as follows: ----- target pcm-5823 mainboard advantech/pcm-5823
# Enable Serial Console for debugging option SERIAL_CONSOLE=1 option TTYS0_BAUD=38400
option DEFAULT_CONSOLE_LOGLEVEL=9 option DEBUG=1
option RAMTEST=1 option USE_GENERIC_ROM=1 option USE_ELF_BOOT=1 option ROM_SIZE=262144 option STD_FLASH=1
option PAYLOAD_SIZE=196608 payload /build/filo-0.4.2/filo.elf -----
and my filo.elf is
-rwxr-xr-x 1 root root 25608 Jan 10 16:54 ../filo-0.4.2/filo.elf
Ok, I'll go read the code when I get a chance and see if I spot anything.
--- Richard Smith smithbone69@yahoo.com wrote:
--- ramesh bios ramesh_bios@yahoo.com wrote:
Ok. So I took a look at the code to figure out why the last output that I see is "Jumping to LinuxBIOS".
I've got a gx1 reference platform on loan for a while. Is that mostly the same hardware as what you have? Perhaps I can help you fix this up.
===== Richard A. Smith Bitworks, Inc.
__________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250 _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com