Ron,
Is this the Advanced Digital Logic MSMP3-S?
I had been talking to Gary Karns at ADL about getting the Linuxbios running on our system. We are using the MSMP5 (PII/266) - Gary tells me they use the same board, only the processor and graphics chip are different - and I don't know how this will interact with linuxbios.
We are looking to use linuxbios on our medical monitoring system, mainly for (boot) speed issues. I am happy to help out with development tasks, provided I am comfortable with level of effort needed.
I will touch bases with Gary on this.
Thanks
Phil
Phil Brooks - Software Engineer Olympic Medical 206-268-5119 philb@olymed.com
-----Original Message----- From: Ronald G Minnich [mailto:rminnich@lanl.gov] Sent: Wednesday, October 30, 2002 12:47 PM To: linuxbios@clustermatic.org Subject: smartcore PIII is up; G2 & G4 efforts started.
This is a PIII?750 in a PC/104 form factor. Fast!
This one was a pain. Where it stands: - it is up, but I have to set IOBASE to 0x2000. There is hardware (ACPI) at 0x1000 that I can't get to turn off, it seems. This problem has never cropped up on piix4e before, so I'm not sure what happened here - etherboot still can't work the ethernet interface. But it can load from IDE, and Linux has no troubles at all, so we put a beoboot Phase 1 boot in CF and let etherboot load Linux, which then boots.
Other than that it works fine. I'm working on a better solution to these problems.
On another note, we have several folks starting G2 and G4 work. Just FYI.
ron
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios