Thanks for your info,I'll try to use SerialICE.
2011-02-28
zxy__1127
发件人： Peter Stuge 发送时间： 2011-02-28 10:45:40 收件人： coreboot@coreboot.org 抄送： 主题： Re: [coreboot] about Intel calpella board(I3+QM57)
Hello,
zxy__1127 wrote:
I have worked on this board two weeks,now it can print from serial port,
This is a very important first step! Good news.
and stop at ddr3 initialling in file romstage.c. I found it difficult to deal with it.
I can understand that. Memory initialization is the most complex task in coreboot, and require many details to be exactly right, including e.g. the sequence of steps and timing between steps.
Is there anyone working on it?
My guess is no.
However, since you have the serial port working, you could try to use SerialICE (see http://serialice.org/ ) to get a better understanding of the operations done by the factory BIOS. This can help to create the code needed in coreboot to bring up a board.
//Peter
