[coreboot] Fwd: Re H8DME-2

[Daniel J. Celta]

Ok I was able to determine the ROM chip of the server.....  Thank you very
much...

Now, I did save the original BIOS information using "flashrom -r <filename>"

But, not sure I know how to rebuild back the BIOS from this file in case
needed.

Do you have any suggestions????

Thanks

On Mon, Jul 5, 2010 at 7:12 PM, [e-mail]  wrote:
> Run flashrom with no parameters and it should tell you what Rom chip you
> have.
>
> Before you pull the trigger you should make sure that you have a way to
> recover the original BIOS (with out the use of the computer you are doing
> this to).
>
> Mvh Anders
>
> ----- Reply message -----
> Fra: "Daniel J. Celta" 
> Dato: man., jul. 5, 2010 23:02
> Emne: [coreboot] H8DME-2
> Til:
>
> Has anyone updated this Supermicro server Board BIOS for the H8DME-2......
>
> I have installed FC10, (i was able to complete this installation by turning
> of the RAID configuration in the BIOS), and now I am having trouble when
> trying to upgrade the Operating system to FC13.
>
> I suspect, if I update the BIOS, I currently have the version of the BIOS
> that came pre-installed with the server, I may be able to upgrade to FC13.
>
> One thing I like to mention, when running "make menuconfig" I was not sure
> of the ROM Chip size, and used the largest available setting 4MB.
> How can I check the proper setting for this parameter????
>
> So now, I have created the coreboot.rom, and think I am ready to run
> "flashrom".......
>
> Is there anything else I need to check before I pull the trigger???
>
> Has anyone had any problems I should be aware of????
>
> Thanks
>
> Daniel