If you'd like to see if you can get ADLO with video working on that board, that would be good.
- Adam Agnew
I have tested the tx97le with ADLO. apply the ADLO 440bx patch. and I use the etherboot to load ADLO from network, works. but get some problems. I use a 3c905cx netcard & a winfast S600DX videocard.
seems that bochs couldn't init the IDE controller. and vga display works.
======================== Bochs BIOS, 1 cpu, $Revision: 1.1 $ $Date: 2002/11/25 02:07:53 $ [BOCHS BIOS VER:1.79] [COMPILE DATE:May 11 2003 TIME:19:16:53]
DEVICE:0
int13_harddisk: function 02, unmapped device for DL=80 Boot from Hard Disk 0 failed FATAL: Could not read the boot disk =========================
I also try the polled IDE patch for the etherboot.
========================= Bochs BIOS, 1 cpu, $Revision: 1.1 $ $Date: 2002/11/25 02:07:53 $ [BOCHS BIOS VER:1.79] [COMPILE DATE:May 11 2003 TIME:19:16:53] DEVICE:0
ROM segment 0xc800 length 0x8000 reloc 0x9400 int15: Func 24h, subfunc 01h, A20 gate control not supported Etherboot 5.0.6 (GPL) ELF for [EEPRO100]
Trying polled ide Waiting for ide disks to spin up This is a hard coded delay and longer than necessary. I am now initializing the ide system Controller 0: detect FAILED Initializing the main controller failed! =========================