Re: [coreboot] s2881 - IDE path problem in GRUB if SATA is enabled

[Ward Vandewege]

On Fri, Mar 07, 2008 at 02:31:30PM -0800, Baski wrote:
> My Config - tyan 2881 + FILO payload + ubuntu on IDE-0 + LBv2
>
> So far I've been using this setup with onboard SATA disabled.
>    Today I opened the jumper and enabled the SATA.  It stopped at Grub
>    console.  I manually entered the path for the boot drive "root (hd0,0)",
>    but it says something like
>    hda1:/boot/vmlinuz.... 'Drive 0 not present'.
>    The original BIOS boots ok.

Try (hd4,0), and hde1.

Thanks,
Ward.