Feel free to test it and give some feedback!!
I can get it to find my CD-ROM drive, but it fails with code: 0003.
According to http://bochs.sourceforge.net/doc/docbook/user/bios-tips.html that means:
For this error, the cdrom support has not been compiled in Bochs, or Bochs could not open the file or device. This is what you get if Bochs is not able to read the cd.
Could you give me pointers as to what CD support I should add/enable in ADLO?
Thanks, Myles
Here is the output of the boot (First it tries the CD, then the HDD):
Enter boot: hdb1:/boot/adlo.cd.elf hda: LBA: IC35L020AVER07-0 hdb: LBA: WDC WD800JB-00JJC0 Mounted ext2fs Loading image... Loaded 66560 bytes in 55ms (1210KB/s) Jumping to entry point... $Revision: 1.163 $ $Date: 2006/07/07 16:10:37 $ Bochs BIOS - build: 06/23/99 $Revision: 1.163 $ $Date: 2006/07/07 16:10:37 $ Options: eltorito
ata0 master: Unknown device ata1 master: SONY DVD-ROM DDU1615 ATAPI-7 CD-Rom/DVD-Rom
CDROM boot failure code : 0003 Boot from CD-Rom failed int13_harddisk: function 02, unmapped device for ELDL=80 Boot from Hard Disk 0 failed FATAL: INT18: BOOT FAILURE