Hi Team
I have a customized board based on Intel valley island design. Reference design uses Intel Baytrail processor E3825, while my design is using E3845.
I am customizing coreboot for this E3845, but getting just garbage on coreboot, so not able to debug where it is stuck.
When I add memory test as secondary payload, I cd see some operations happening on console but not able to decode it.
Tried with all possible baud rates, but no success. USB and display also not enumerating.
Can you please give some clue? Is it due to different core speed for E3835(1.33GHZ) vs E3845(1.91GHz).
Where is the option to change this in coreboot?
Appreciate your support.
Regards Mayuri "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."