Author: uwe Date: 2007-12-02 20:03:23 +0100 (Sun, 02 Dec 2007) New Revision: 2995
Modified: trunk/util/flashrom/README trunk/util/flashrom/board_enable.c Log: Add board-enable for Acorp 6A815EPD.
Signed-off-by: Jonathan A. Kollasch jakllsch@kollasch.net Acked-by: Ronald G. Minnich rminnich@gmail.com Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/util/flashrom/README =================================================================== --- trunk/util/flashrom/README 2007-11-30 02:08:26 UTC (rev 2994) +++ trunk/util/flashrom/README 2007-12-02 19:03:23 UTC (rev 2995) @@ -58,6 +58,7 @@ * GIGABYTE GA-M57SLI-S4 v2.0: use -m gigabyte:m57sli * GIGABYTE GA-M61P-S3: use -m gigabyte:m61p * MSI K8N Neo3: use -m msi:k8n-neo3 +* Acorp 6A815EPD: use -m acorp:6a815epd
ROM Layout Support
Modified: trunk/util/flashrom/board_enable.c =================================================================== --- trunk/util/flashrom/board_enable.c 2007-11-30 02:08:26 UTC (rev 2994) +++ trunk/util/flashrom/board_enable.c 2007-12-02 19:03:23 UTC (rev 2995) @@ -323,6 +323,32 @@ }
/** + * Suited for Acorp 6A815EPD + */ +static int board_acorp_6a815epd(const char *name) +{ + struct pci_dev *dev; + uint16_t port; + uint8_t val; + + dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */ + if (!dev) { + fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n"); + return -1; + } + + /* Use GPIOBASE register to find where the GPIO is mapped. */ + port = (pci_read_word(dev, 0x58) & 0xFF80) + 0xE; + + val = inb(port); + val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */ + val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */ + outb(val, port); + + return 0; +} + +/** * We use 2 sets of IDs here, you're free to choose which is which. This * is to provide a very high degree of certainty when matching a board on * the basis of subsystem/card IDs. As not every vendor handles @@ -376,6 +402,8 @@ "ibm", "x3455", "IBM x3455", board_ibm_x3455}, {0x8086, 0x7110, 0x0000, 0x0000, 0x8086, 0x7190, 0x0000, 0x0000, "epox", "ep-bx3", "EPoX EP-BX3", board_epox_ep_bx3}, + {0x8086, 0x1130, 0x0000, 0x0000, 0x105a, 0x0d30, 0x105a, 0x4d33, + "acorp", "6a815epd", "Acorp 6A815EPD", board_acorp_6a815epd}, {0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL} /* Keep this */ };