I propose:
$(LB)/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c 138c138 < RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ ---
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x68,/* GPIO39 PCI_GNT3 */ \
My vga pci card and a pci network card are recognised with this under LinuxBIOS! I don't understand why this works, but it works.. (I will explain tomorrow how I found this value)
Please can someone validate my change?
Regards, Florentin
Quoting echelon@free.fr:
Hi,
Quoting yhlu yinghailu@gmail.com:
On 9/25/07, echelon@free.fr echelon@free.fr wrote:
Hi, This fix still doesn't work for m57sli v2.0.. As promised, I send a log with :
- full debugging log in LinuxBIOS;
Please only set log_level to 8...
- Linux boot messages;
- the result of a "lspci -vvv" command (inclused at the end of the file
<=
the
test was done with the PCI VGA card installed into a PCI slot);
lspci -vvxxx lspci -tv are good.
Please find the results of these commands in the attached files (done with a updated version of LinuxBIOS - i.e. after your patch was applied) I add the result of the command "lspci -xxx" under the award bios for reference..
- the result of the command "setpci -s 00:01.0 78.l"
?, you already did that in LinuxBIOS?
Sorry I don't understand the question.. Do you mean that "setpci" was executed after I updated LB? Yes, it was!..
Florentin