[LinuxBIOS] LinuxBIOSv2 r2452 DK8-HTX

[Chris Stillo]

Hello Yinghai Lu,

I just tried LinuxBIOSv2 r2452 for my DK8-HTX, and still have the 
problem with IDE bus timeout (log shown below).

Maybe my FILO Config is not correct, could you send me yours?

Thanks,
Chris
--------------------------------------------------------------------------------------------------

Jumping to boot code at 0x1079b8
FILO version 0.5 (cstillo@clyde) Thu Sep 21 16:02:57 CDT 2006
Press <Enter> for default boot, or <Esc> for boot prompt... timed out
boot: hda2:/boot/vmlinuz.lb root=/dev/hda2 initrd=/boot/initrd.lb 
console=ttyS0,
115200 console=tty0 video=atyfb:1024x768-16
Detected floating bus
No drive detected on IDE channel 0
> There is one guy post the his patch on the list, can you look at it?
> put SB chain on bus0
> sb chain is on link2 in the Config.lb
>
> I'm asking one MB to verify why CAR is not working.
>
> Thanks
>
> Yinghai Lu
>
> -----Original Message-----
> From: Chris Stillo [mailto:[e-mail]] 
> Sent: Wednesday, September 27, 2006 6:59 PM
> To: Lu, Yinghai
> Subject: Re: logfile -- dk8_htx_linuxbios_3.rom
>
> Hello, sorry to bother you again. Any update on this? If you are too 
> busy, I can repost to the message board to see if anyone else has any 
> more ideas.
>
> Thanks,
> Chris
> > I don't know why your platform doesn't like to restart while
>
> transition
> > from CAR To Ram code.
> >
> > Can you check the serial Number in your CPU? I'd like to check that
>
> cpu
> > in my platform.
> >
> > Thanks
> >
> > Yinghai Lu
> >
> > -----Original Message-----
> > From: Chris Stillo [mailto:[e-mail]] 
> > Sent: Tuesday, September 26, 2006 2:15 PM
> > To: Lu, Yinghai
> > Subject: Re: logfile -- dk8_htx_linuxbios_3.rom
> >
> > Hi,
> >
> > Sorry to bother you. Is there any update on this issue? Is there a
>
> file
> > you can recommend I modify?
> >
> > Thanks,
> > Chris
> > > where are you? SF bay area?
> > >
> > > and what's you company name? pathscale?
> > >
> > > YH
> > > *From:* Chris Stillo [mailto:[e-mail]]
> > > *Sent:* Fri 9/22/2006 8:22 PM
> > > *To:* Lu, Yinghai
> > > *Subject:* Re: logfile -- dk8_htx_linuxbios_3.rom
> > >
> > > Sorry for the delay. I corrupted bootstrap ROM and had to
>
> recover....
> > > Anyway here is logfile for #3... it loops over and over, I cut it
>
> off.
> > > LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 15:04:12 PDT 2006
> >
> > starting...
> > > bsp_apicid=00
> > > (0,1) link=01
> > > (1,0) link=01
> > > 02 nodes initialized.
> > > core0 started:  01
> > > started ap apicid:  01 03
> > > SBLink=02
> > > NC node|link=02
> > > ht reset -
> > >
> > > LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 15:04:12 PDT 2006
> >
> > starting...
> > > bsp_apicid=00
> > > (0,1) link=01
> > > (1,0) link=01
> > > 02 nodes initialized.
> > > core0 started:  01
> > > started ap apicid:  01 03
> > > SBLink=02
> > > NC node|link=02
> > > SMBus controller enabled
> > > Ram1.00
> > > Ram1.01
> > > Ram2.00
> > > Ram2.01
> > > Ram3
> > > Initializing memory:  done
> > > Initializing memory:  done
> > > Ram4
> > > v_esp=000cfe84
> > > testx = 5a5a5a5a
> > > Copying data from cache to ram -- switching to use ram as stack...
> >
> > Done
> > > testx = 5a5a5a5a
> > > Disabling cache as ram now
> > > Clearing initial memory region:
> > >
> > > INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---
> > >
> > > Issuing SOFT_RESET...
> > >
> > > LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 15:04:12 PDT 2006
> >
> > starting...
> > > bsp_apicid=00
> > > (0,1) link=01
> > > (1,0) link=01
> > > 02 nodes initialized.
> > > core0 started:  01
> > > started ap apicid:  01 03
> > > SBLink=02
> > > NC node|link=02
> > > SMBus controller enabled
> > > Ram1.00
> > > Ram1.01
> > > Ram2.00
> > > Ram2.01
> > > Ram3
> > > Initializing memory:  done
> > > Initializing memory:  done
> > > Ram4
> > > v_esp=000cfe84
> > > testx = 5a5a5a5a
> > > Copying data from cache to ram -- switching to use ram as stack...
> >
> > Done
> > > testx = 5a5a5a5a
> > > Disabling cache as ram now
> > > Clearing initial memory region:
> > >
> > > INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---
> > >
> > > Issuing SOFT_RESET...
> > > > -----Original Message-----
> > > > From: Chris Stillo [mailto:[e-mail]]
> > > > Sent: Friday, September 22, 2006 2:59 PM
> > > > To: Lu, Yinghai
> > > > Subject: Re: logfile -- dk8_htx_linuxbios_2.rom
> > > >
> > > > LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 13:50:42 PDT 2006
> > > > starting...
> > > > bsp_apicid=00
> > > > (0,1) link=01
> > > > (1,0) link=01
> > > > 02 nodes initialized.
> > > > core0 started:  01
> > > >  01 02 03SBLink=02
> > > > NC node|link=02
> > > > ht reset -
> > > >
> > > > LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 13:50:42 PDT 2006
> > > > starting...
> > > > bsp_apicid=00
> > > > (0,1) link=01
> > > > (1,0) link=01
> > > > 02 nodes initialized.
> > > > core0 started:  01
> > > >  01 02 03SBLink=02
> > > > NC node|link=02
> > > > SMBus controller enabled
> > > > Ram1.00
> > > > Ram1.01
> > > > Ram2.00
> > > > Ram2.01
> > > > Ram3
> > > > Initializing memory:  done
> > > > Initializing memory:  done
> > > > Ram4
> > > > v_esp=000cfd98
> > > > testx = 5a5a5a5a
> > > > Copying data from cache to ram -- switching to use ram as stack...
> >
> > Done
> > > > testx = 5a5a5a5a
> > > > Disabling cache as ram now
> > > > Clearing initial memory region:
> > > >
> > > > INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---
> > > >
> > > > Issuing SOFT_RESET...