Hello again from Gregg C Levine Ron, I've tried your suggestion for the 440gx, it, looked like it did not work. I've attached a script file from that one. And for the 440bx, I have also attached a script file, and for it, the config file. I'm confused. Really confused. There are also some other errors during the build runs for the 440gx, if you want to see them, I'll make out a new script file for that one. Gregg C Levine drwho8@worldnet.att.net Magic word is "Grok!"
Script started on Mon Nov 18 22:31:17 2002 root@drwho:/usr/src/lobos/work/l440gx-build/l440gx# make cp /usr/src/lobos/freebios/src/arch/i386/config/crt0.base crt0.S make: *** No rule to make target `/usr/src/lobos/freebios/src/arch/i386/smp/secondary.inc', needed by `crt0.s'. Stop. root@drwho:/usr/src/lobos/work/l440gx-build/l440gx# exit
Script done on Mon Nov 18 22:31:25 2002
Script started on Mon Nov 18 22:33:03 2002 root@drwho:/usr/src/lobos/work/l440bx-build/l440bx# make gcc -x assembler-with-cpp -DASSEMBLY -E ... crt0.S > crt0.s gcc ... -o crt0.o crt0.s crt0.s: Assembler messages: crt0.s:662: Error: suffix or operands invalid for `cmp' crt0.s:2028: Warning: indirect jmp without `*' make: *** [crt0.o] Error 1 root@drwho:/usr/src/lobos/work/l440bx-build/l440bx# exit
Script done on Mon Nov 18 22:33:16 2002
# Note that this is RELATIVE TO WHERE YOU ARE WHEN YOU RUN THE # CONFIG TOOL. Make it absolute if you like target /usr/src/lobos/work/l440bx-build/l440bx
mainboard intel/l440bx
# Enable Serial Console for debugging # It will come up at 115200,8n1 option SERIAL_CONSOLE=1
# Enable MicroCode update and L2 Cache init for PII and PIII option UPDATE_MICROCODE option CONFIGURE_L2_CACHE
# Use the internal VGA frame buffer device option HAVE_FRAMEBUFFER=1 option USE_CACHE_RAM=0 option USE_GENERIC_ROM=1 option USE_ELF_BOOT=1
#makedefine PHLASH_BASE_NAME=p13-0125 #makedefine BOOT_IMAGE=/tftpboot/netboot.ebi makedefine BOOT_IMAGE=vmlinux.bin.gz.block
# Path to your kernel (vmlinux) # NOTE; you need a path to your test12 kernel here. linux /usr/src/linux-2.4.17
# Kernel command line parameters commandline ro panic=5 root=/dev/hda1 console=ttyS0,115200 debug 3