Remove some remaining code inside #if 0.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: LinuxBIOSv3-if0crud/northbridge/amd/geodelx/raminit.c =================================================================== --- LinuxBIOSv3-if0crud/northbridge/amd/geodelx/raminit.c (Revision 591) +++ LinuxBIOSv3-if0crud/northbridge/amd/geodelx/raminit.c (Arbeitskopie) @@ -216,15 +216,6 @@ if (spd_byte1 == 0xFF) spd_byte1 = 0;
- /* I don't think you need this check. */ -#if 0 - if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0) { - printk(BIOS_EMERG, "DIMM overclocked. Check GeodeLink speed\n"); - post_code(POST_PLL_MEM_FAIL); - hlt(); - } -#endif - /* Use the slowest DIMM. */ if (spd_byte0 < spd_byte1) spd_byte0 = spd_byte1; @@ -580,13 +571,6 @@ msr.lo &= ~0xF0; msr.lo |= 0x40; /* Set refresh to 4 SDRAM clocks. */ wrmsr(MC_CF07_DATA, msr); - - /* Memory Interleave: Set HOI here otherwise default is LOI. */ -#if 0 - msr = rdmsr(MC_CF8F_DATA); - msr.hi |= CF8F_UPPER_HOI_LOI_SET; - wrmsr(MC_CF8F_DATA, msr); -#endif }
/** Index: LinuxBIOSv3-if0crud/northbridge/amd/geodelx/geodelx.c =================================================================== --- LinuxBIOSv3-if0crud/northbridge/amd/geodelx/geodelx.c (Revision 591) +++ LinuxBIOSv3-if0crud/northbridge/amd/geodelx/geodelx.c (Arbeitskopie) @@ -163,20 +163,6 @@ printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __FUNCTION__);
enable_shadow(dev); - -#if 0 - /* Swiss cheese */ - msr = rdmsr(MSR_GLIU0_SHADOW); - - msr.hi |= 0x3; - msr.lo |= 0x30000; - - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", - MSR_GLIU0_SHADOW, msr.hi, msr.lo); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", - MSR_GLIU1_SHADOW, msr.hi, msr.lo); - /* TODO: Is the respective wrmsr() missing? */ -#endif }
/**