On Fri, Oct 17, 2008 at 06:26:52PM +0300, Andriy Gapon wrote:
Add register definitions for W83627HF based on publicly available specification and local testing. Also tweak a little bit algorithm for (internal) device id calculation: chips from W83627HF/F/HG/G family have id of 0x52 and a multitude of revisions (0x1x, 0x3A, 0x41, maybe more), chips from W83627HF/GF family have the same device id but revisions 0xFx.
Signed-off-by: Andriy Gapon avg@icyb.net.ua
Looks good, thanks! Committed in r3670.
In addition, I've added your name to the list of contributors in the README, and I removed...
Index: winbond.c
--- winbond.c (revision 3667) +++ winbond.c (working copy) @@ -39,7 +39,46 @@ /* ID and rev[3..0] */ {0x527, "W83977CTF", { /* TODO: Not yet in sensors-detect */ {EOT}}},
[...]
{0xa, "ACPI",
/* Note: Datasheet says 0xe2 can't be read/written. */
... this line. It seem to be copy-paste from some other Super I/O, the datasheet for this one doesn't seem to say that 0xe2 cannot be read/written anywhere (or at least I didn't find that place).
{0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xf0,0xf1,0xf3,0xf4,0xf6,0xf7,0xf9,0xfe,0xff,EOT},{0x00,0x00,0x00,0x00,MISC,MISC,MISC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,RSVD,RSVD,EOT}},
Uwe.