Hi, just wanted to know if I could install coreboot onto my old board? Thanks in advance!
The requested data:
board vendor: Shuttle board name: AN35N Ultra V1.1 CPU: AMD Athlon XP 3200+ northbridge: Nvidia nForce2 southbridge: Nvidia MCP vendor board info: http://www.shuttle.eu/_archive/older/en/an35n_faq.htm
lspci -tvnn: -[0000:00]-+-00.0 NVIDIA Corporation nForce2 IGP2 [10de:01e0] +-00.1 NVIDIA Corporation nForce2 Memory Controller 1 [10de:01eb] +-00.2 NVIDIA Corporation nForce2 Memory Controller 4 [10de:01ee] +-00.3 NVIDIA Corporation nForce2 Memory Controller 3 [10de:01ed] +-00.4 NVIDIA Corporation nForce2 Memory Controller 2 [10de:01ec] +-00.5 NVIDIA Corporation nForce2 Memory Controller 5 [10de:01ef] +-01.0 NVIDIA Corporation nForce2 ISA Bridge [10de:0060] +-01.1 NVIDIA Corporation nForce2 SMBus (MCP) [10de:0064] +-02.0 NVIDIA Corporation nForce2 USB Controller [10de:0067] +-02.1 NVIDIA Corporation nForce2 USB Controller [10de:0067] +-02.2 NVIDIA Corporation nForce2 USB Controller [10de:0068] +-04.0 NVIDIA Corporation nForce2 Ethernet Controller [10de:0066] +-06.0 NVIDIA Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a] +-08.0-[01-02]--+-04.0 Adaptec AIC-7892B U160/m [9005:0081] | +-07.0 Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] +-09.0 NVIDIA Corporation nForce2 IDE [10de:0065] -1e.0-[03]--
superiotool -dV: superiotool r6158 Found ITE IT8712F (id=0x8712, rev=0x5) at 0x2e
flashrom -p internal -V: flashrom v0.9.7-r1711 on Linux 3.11.10-17-pae (i686) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.2.0, GCC 4.8.1 20130909 [gcc-4_8-branch revision 202388], little endian Command line (3 args): /usr/sbin/flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 901M loops per second, delay more than 10% too short (got 82% of expected delay), recalculating... 824M loops per second, delay more than 10% too short (got 75% of expected delay), recalculating... 1013M loops per second, 10 myus = 9 us, 100 myus = 163 us, 1000 myus = 919 us, 10000 myus = 33256 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "Shuttle Inc" DMI string baseboard-product-name: "AN35 " DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712 on port 0x2e Found chipset "NVIDIA NForce2" with PCI ID 10de:0060. Enabling flash write... OK. Super I/O ID 0x8712 is not on the list of flash capable controllers. The following protocols are supported: Non-SPI. *** Probing output reduced to findings *** Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0xb0 Found Winbond flash chip "W49V002A" (256 kB, LPC) at physical address 0xfffc0000. Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0xb0 Found Winbond flash chip "W49V002A" (256 kB, LPC). No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x92